Extralink SFP 1.25G | SFP CWDM Module | 1,25Gbps, 1490nm, single mode, 40km, LC, DOM
CODE: EX.13582 / EAN: 5903148913582
EN
Extralink SFP CWDM 1.25G is a solution from Extralink designed for serial optical data transmission. The single-mode SFP uses a LC connection and allows transmission to 1.25 Gbp. The device allows transmission over a distance of up to 40 km from the SMF. The SFP fiber optic module is also characterized by low power consumption.
Features / filters | |
Output connector | LC |
SFP module - port speed | 1,25 Gbps |
Transmission distance | Over 20km |
Coarse Wavelength Division Multiplexing (CWDM) | Yes |
Easy to install | Yes |
Fiber type | SM (Single-Mode) |
Housing material | Metal |
Interface type | SFP |
Maximum data transfer rate | 1250 |
Maximum transfer distance | 40000 |
Multi-mode fiber (MMF) supported | No |
Number of products included | 1 |
Product colour | Stainless steel |
SFP transceiver type | Fiber optic |
Single-mode fiber (SMF) supported | Yes |
Type of SFP duplex | Wavy (WDM) |
Wavelength | 1490 nm, 1490, |
Basic technical parameters | |
Transmission speed | Up to 1.25 Gbps |
Distance | Up to 40 km |
Type | SFP |
Output connector | LC |
Type of transmission | Single-Mode |
Kind of asshole | CWDM |
Casing temperature during operation | 0°C to 70°C |
Supply voltage | 3.15 V~3.45 V (optimal 3.3 V) |
Power supply current | 290 mA |
Optical characteristics | |
Average output power | -3~3 dBm |
Central wavelength (sending) | lc-6.5~lc+6.5 nm (optimally lc) |
Extinction coefficient | Min. 8.2 dB |
Spectral Width (RMS) | Max. 1 nm |
Side mode damping factor | Minimum 30 dB |
Optical increase/fall time (20%~80%) | Max. 0.26 dB |
Jitter | Max. 0.43 dBm |
Output optical mask | Compliant with IEEE 802.3z |
Sensitivity to reception | Max. -24 dBm |
Central wavelength | 1260~1620 nm |
Overload of the receiver | Min. -3 dBm |
LOS De-Assert | Max. -25 dBm |
LOS Assert | Min. -35 dBm |
LOS Hysteresis | 1-4 dB |