Extralink SFP 1.25G | SFP WDM Module | 1,25Gbps, 1490/1550nm, single mode, 80km, LC, DOM, pair
CODE: EX.8741 / EAN: 5902560368741
EN
The set of Extralink SFP 1.25G WDM modules is designed for data transmission via single-mode optical fibers over distances to 80 km. The single-mode SFP consists of five sections, i.e. DFB laser transmitter, LD controller, PIN photodiode, limiting amplifier and MCU control unit. The SFP optical modules are MSA (Small Form Factor Pluggable Multi-Sourcing Agreement) compliant. They support 1.25 Gb/s data transmission. Connection of fiber optic SFP modules can be done without interruption of the device.
Features / filters | |
Output connector | LC |
SFP module - port speed | 1,25 Gbps |
Transmission distance | Over 20km |
Easy to install | Yes |
Ethernet LAN | No |
Fiber cable diameters supported (core/cladding) | 9/125 |
Fiber optic connector | LC |
Fiber type | SM (Single-Mode) |
Form factor | CFP4 |
Hot-swap | Yes |
Housing material | Zinc steel |
Input voltage | 3.3 |
Interface type | SFP |
Maximum data transfer rate | 1250 |
Maximum transfer distance | 80000 |
Plug and Play | Yes |
Product colour | Metallic |
SFP transceiver type | Fiber optic |
Single-mode fiber (SMF) supported | Yes |
Type of SFP duplex | Wavy (WDM) |
Wavelength | 1490/1550 nm |
Basic technical parameters | |
Transmission speed | Up to 1.25 Gbps |
Distance | Up to 80 km |
Type | SFP |
Output connector | LC |
Type of transmission | Single-Mode |
Kind of asshole | Waveform (WDM) |
Storage temperature | -40℃~85℃ |
Supply voltage | -0.5 V~4 V |
Relative humidity | 5%~95% |
Electricity consumption | 1.2 W |