EN
EOL

Extralink VICTOR-24V | PoE Switch | 8x Gigabit Passive PoE (24V) , 2x SFP, 1x Console Port, 120W, Managed

CODE: EX.13216 / EAN: 5903148913216

Extralink VICTOR-24V | PoE Switch | 8x Gigabit Passive PoE (24V) , 2x SFP, 1x Console Port, 120W, Managed

CODE: EX.13216 / EAN: 5903148913216
116,80 GBP without VAT (net)
Out of stock
Number of LAN ports: 8x [10/100/1000M (RJ45)] ,  2x SFP (1,25G), 
Number of PoE ports: 8x [Passive PoE 24V (1G)]
Show more parameters

About product

Extralink Victor-24V Manageable PoE Switch with Gigabit Ethernet ports

VICTOR-24V is an 8-port Gigabit Manageable Switch. This switch provides high performance, QoS functions at the enterprise level, advanced security strategies and rich management functions in L2 layer. In addition, the switch is equipped with 2-gigabit SFP sockets, which allows for flexible network expansion. VICTOR 24V is a cost-effective network solution for small and medium-sized enterprises.

Extralink Victor-24v Switch poe

Power over Ethernet power supply

The switch offers PoE power supply with 24V on eight RJ45 ports with 1000Mbps throughput. The total PoE power budget is 120W. It can power devices such as IP cameras, wireless access points that are compatible with Passive PoE (24V).

Switch poe cctv extralink victor 24v

Wide range of possibilities

VICTOR-24V has many security and management functions. The IP-MAC-Port-VID Binding and Access Control List (ACL) functions protect against storms, ARP attacks and Denial-of-Service (DoS). The Quality of Service function (QoS, L2 to L4) provides extended traffic management capabilities. QoS restricts access to sensitive network resources by blocking packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. An easy-to-use management interface as well as a CLI console can be used to manage the device.

Large number of layer 2 functions

To enhance the application capabilities of Layer 2 switches, the VICTOR-24V supports a complete range of Layer 2 functionality including VLAN 802.1Q tags, port isolation, port mirroring, STP/RSTP, Link Aggregation Control Protocol and Function Flow Control 802.3x. In addition, the switch provides advanced network maintenance features such as back loop detection, cable diagnostics and IGMP Snooping function. IGMP snooping ensures that the switch only sends the multicast stream to the right recipients, while IGMP throttling & filtering restricts each subscriber at port level to prevent unauthorized access to multicast.

Main features of the device:

  • Full Gigabit Switch with 8 PoE ports
  • External 120W power supply unit
  • L2/L3/L4 QoS and IGMP snooping optimise voice and video applications.
  • STP/RSTP support
  • Simultaneous use of up to 4K QVLANs
  • Link Aggregation Control Protocol (LACP)
  • WEB/CLI management modes, SNMP, numerous management functions.
victor 24v power supply

Specification

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 8x [10/100/1000M (RJ45)] , 2x SFP (1,25G),
Number of PoE ports 8x [Passive PoE 24V (1G)]
Management By web browser, CLI - Command Line Interface,
Power (W) 120
Switching layer 2
Type of case Desktop

Technical specifications for the Victor-24V model

Equipment features
Physical Interfaces 8x 10/100/1000Mbps RJ45(Auto Negotiation /Auto MDI/MDIX)
2x 1000Mb/s SFP
1x console port
Power consumption 120W (max. with connected PoE devices)
External power supply DC 24V 5A output
AC input 110~230V 50/60HZ
PoE ports (RJ45) Passive PoE 24V
PoE ports: Port1- Port8
Power: 120W
Capacity 20Gb/s
Packet transfer rate 14.9Mpps
Table of MAC addresses 8K
Packet buffer memory 4Mb
Jumbo frame 10240 Bytes
Dimensions 225mm x 105mm x 32mm
Software features
Quality of Service Support 802.1p CoS/DSCP Priority
Support for 4 priority queues
Planning queues: SP, WRRR, SP+WRR
Port/Flow - Transfer speed limit
Functions L2 IGMP Snooping V1/V2/V3 802.3ad LACP (up to 8 aggregation groups, containing 8 ports per group)
Spanning Tree
STP/RSTP/MSTP
Port isolation
BPDU filtering/protection
TC/Root protect
Backloop detection
802.3x Flow control
VLAN It supports up to 4K VLANs at the same time (with 4K VLAN IDs).
Port/ MAC/Protocol-based VLAN Management VLAN Configuration
Access control list L2～L4 Packet filtering based on source and destination MAC address, IP address, TCP/UDP, 802.1p, DSCP, protocol and VLAN identifier; Time range based
Security IP-MAC-Port-VID Binding
IEEE 802.1X Port/MAC Based authentication, Radius,Guest
VLAN
DoS Defence
Dynamic ARP inspection (DAI)
SSH v1/v2
SSL v2/v3/TLSv1
Port Security
Broadcast/Multicast/Unknown-unicast Storm Control
Management Graphical user interface (GUI) and CLI management
SNMP v1/v2c/v3, compatible with public MIBs
Customer DHCP/BOOTP,DHCP Snooping,DHCP Option82
Processor monitoring
Port Mirroring
Time setting: SNTP
Integrated NDP/NTDP function
Firmware update: TFTP and Web
Diagnosis of the system: VCT SYSLOG and public MIBS
Environmental features Operating temperature: 0°C - 40°C
Storage temperature: -40°C - 70°C
Working humidity: 10% - 90% RH non-condensing
Storage humidity: 5% - 90% RH non-condensing

Support

Faq

What is the default address of the Poe Extralink Victor-24V switch ?

Default IP address for Extralink Victor-24V: 192.168.0.1

What is the default login and password for the Extralink Victor-24V switch ?

Extralink Victor-24V default IP address: admin

Extralink Victor-24V default password: admin

116,80 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
 English (EN)
Please select a different country or region to shop in a language that suits you.