EN

Huawei MA5608T | OLT | GPON, 1x MCUD1 Uplink 10G, 1x MPWC AC

CODE: MA5608T OLT MCUD1, MPWC

Huawei MA5608T | OLT | GPON, 1x MCUD1 Uplink 10G, 1x MPWC AC

CODE: MA5608T OLT MCUD1, MPWC
3622,53 GBP without VAT (net)
Out of stock

About product

Huawei MA5608T

Huawei MA5608T is the world's first OLT terminal that combines the functionality of an aggregation switch and router. The MA5608T can be installed in a residential neighborhood, reducing the use of ODN backbone optical cables. The terminal supports ADSL2, SHDSL, POTS, GPON, 10G GPON and P2P access modes, and provides subscribers with Internet, voice and video access. It is the smallest OLT from Huawei capable of supporting up to 4096 users at once. The terminal can be used as a mini-OLT supporting GPON and 10G GPON and as a mini-DSLAM supporting ADSL2, VDSL2, SHDSL

MA5608T_huawei

Aggregation management for remote sites

The terminal supports aggregation and plug-and-playmanagement for remote sites. This eliminates the need to run on-site software and OSS integration, which simplifies device management. Management of remote devices is focused on OLT through GE aggregation. In this way, service configuration, software upgrades, and maintenance of remote sites can be performed using OLT, significantly reducing the complexity of FTTx network management.

Triple protection

TheMA5608T provides 3 protection mechanisms on the network side, access side, and device side to ensure services are not interrupted.

Network-side OLT

On the network side, OLT supports ring technologies such as link aggregation, Multiple Spanning Tree Protocol (MSTP), and Ethernet ring protection switching (ERPS) to ensure uninterrupted services.

Access-side OLT

  • OLT supports Type B protection, providing 1 1 protection for GPON ports and backbone optical cables.
  • The OLT supports Type C protection, providing 2 PON ports to connect to the ONU and providing 1 1 protection for backbone optical cables, optical splitters, and optical distribution cables.

huawei_ma5608t
MA5608T OLT GPON 1x MCUD1 UPLINK 10G; MPWC DC

Specification

PON standard GPON
Switching capacity of the mounting bus 720 Gbit / s
Packet transmission rate of L2 system MCUD / MCUD1: 190 Mb/s (active / standby), 380 Mb/s (load sharing)
Control board switching capability MCUD / MCUD1: 128 Gbit / s (active / standby), 256 Gbit / s (load sharing)
Switching / transfer delay Short transmission delay: A 100 Mbit/s Ethernet port sends 64-byte Ethernet packets with a delay of less than 20 μs.
Service port Number of Ethernet ports 10 Mbit / s / 100 Mbit / s: 1
Monitoring port Number of environment monitoring serial ports: 1
Ethernet Outband Management Port (RJ-45) MCUD / MCUD1
Power mode DC
Rated voltage DC power supply: -48 V / -60 V
Environmental temperature From -40 ° C to 65 ° C
3622,53 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.