TheMA5800 is the industry's first intelligent aggregation OLT with a distributed architecture that is positioned as the next generation OLT for NG-PON. The product is designed to help operators create networks with more bandwidth, higher speeds and smarter connectivity with better service.
The OLT terminal provides access to GPON, 10G PON, including XG-PON and XGS-PON, as well as P2P 10GE/GE. It supports deployment in FTTH, FTTD, FTTB, and FTTC networks , and is applicable in scenarios such as home access, enterprise access, and wireless Internet access to combine all services into a single fiber network. The MA5800 functions as a high capacity aggregation device in the network.
By aggregating traffic from ONTs, MDUs and campus switches, it simplifies the network architecture.
TheMA5800 uses a distributed architecture, which is the same as a router, in which service processing on the control board is distributed to each service board, improving the switching capability of the system,
performance and reliability.
The MA5800 supports distributed cache for fast 4K/8K video startup
or channel switching.
The device also supports VMOS video quality monitoring . Built-in probes on the boards are used to collect video indicators, and NMS is used for remote monitoring and performance query monitoring, which improves video O&M.
During OLT updates, the video service is not interrupted, enhancing the user experience.
With support for combo PON technology, the MA5800 terminal can work with an embedded WDM1r optical module to provide a seamless evolution from GPON to XG(S)-PON.
The Huawei MA5800-X7 chassis can be mounted in a 19" wide c rack. The modular platform is equipped with slots for service card installation, allowing up to 7 modular GPON cards of 16 ports each to be installed. Hardware and software ma5800-X2, MA5800-X7, MA5800-X15 and MA5800-X17 are compatible.
Huawei OLT GPON MA5800-X7 6RU chassis included: Two MPLA control modules (4 SFP/SFP+ 1/10g ports each) Two PILA power supplies at 48V. Fan assembly
|Number of slots|
|VLAN||IEEE 802.1Q: 4094; QinQ; VLAN Translation|
|Mac Address Table||Table size: 262143|
|Commutation protocols||STP/RSTP/MSTP; ERPS (G.8032)|
|Multi search engine|
|Multicast VLAN (MVR)||Support|
|Routing table||IPv4 - 65536 routes
IPv6 - 16384 routes
|Routing protocols||Static Routing; RIPv1/2; OSPFv2; IS-IS; BGP|
|MPLS / VPN||Support. MPLS LDP, VPLS, PWE3|
|IPv4 script||65535 Ingress + Egress|
|IPv6 script||65535 Ingress + Egress|
|DHCP Server||Not supported|
|DHCP Relay option82||Support|
|IP Source Guard||Support|
|Broadcast, multicast, unknown unicast suppression||Support|
|Quality of Service QoS|
|QoS queues per port||8|
|Restriction of traffic||Support|
|Traffic signs||802.1 p, DSCP|
|IPv6||Static Routing; ICMPv6; IPv6 Neighbor Discovery; RIPng; OSPFv3; IS-IS IPv6|
|Management||Telnet; SSH; LLDP; SNMP v1/v2/v3; Syslog; NTP|
|OAM||802.3ah (EFM); 802.1ag (CFM); Y.1731|
|Humidity||5 to 85% (non-condensing)|
|Operating temperature||from -40 to +65°C|
|Maximum power consumption||up to 662 in|
|Dimensions (HxWxD)||263.9mm (6U) x 482.6mm x 268.7mm|
- The active standby switch command / is executed manually.
- The original active control board is defective.
- A physical port or line on the original active control board is faulty.
- The active control board is defective, causing the system to switch safely.
- The daughter synchronization card of the original control board is defective.
- The system performs intermittent switching.