EN
Overview:
The NFT 1N/ 1N AF are indoor WI-FI access points based on 802.11N technology with integrated 2.4 GHz (2x2) MiMo radios boasting an output power of 28 dBm. 3 Ethernet ports allow connecting multiple devices to the access point. The NFT 1N model is powered with a 12-24V passive PoE adapter and the NFT 1N AF model supports the 802.3af standard, which allows powering the device using a PoE switch.
Features:
- Responsive HTML 5 based GUI
- 128 concurrent clients
- 8 virtual networks (SSID+VLAN)
- IPv6 support
- WNMS compatible
Specifications:
Wireless | |
WLAN standard | IEEE 802.11 b/g/n |
Radio mode | MIMO 2x2 |
Operating mode | Access point, repeater |
Radio frequency band | 2.402 - 2.484 GHz (country dependent) FCC 2.412 - 2.462 GHz (CH1-CH11) |
Transmit power | 2.4 GHz: 28 dBm @ MCS0 (FCC Max certified TX power: 28 dBm) |
Channel size | 20, 40 MHz |
Modulation schemes | 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) |
802.11 b: DSS (CCK, DQPSK, DBPSK) | |
Data rates | 802.11 n @ 40 MHz: 300, 270, 240, 180, 120, 90, 60, 30 Mbps |
802.11 g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps | |
802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps | |
Duplexing scheme | Time division duplex |
Wireless security | WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM) |
Antenna | |
Type | 2 x internal omni-directional antennas |
Gain | 3 dBi |
Coverage radius | 100 meters (328 ft) |
Wired | |
Interface | 3 x 10/100 Base-T, RJ45 |
Networking | |
Operating mode | Bridge, router IPv4 and IPv6 |
Management IPv4 | Static, dynamic |
Management IPv6 | Static, dynamic stateless, dynamic stateful |
Secondary IPv4 | Supported |
VLAN | 802.1Q for management and data |
Virtual SSID | 8 per each radio |
Client isolation | Supported |
Services | |
Services | SNMP server, NTP client, WNMS client |
Power | |
Power method
| NFT 1N: 12-24 VDC passive PoE; additional 12-24V DC input |
NFT 1N AF: 802.3af with passive PoE (48V) support; additional 48V DC input | |
Power supply | NFT 1N: 100 - 240 VAC to 12-24V VDC passive PoE (inlcuded) |
NFT 1N AF:100 – 240 VAC to 48 VDC 802.3af PoE (not included) | |
Power consumption (max) | 6.24 W |
Management | |
System monitoring | SNMP v1, wyslog |
Physical | |
Dimensions | 153 mm (6.1‘’), 147 mm (5.8 ‘’), 29 mm (1.14 ‘’) |
Weight | 188 g (6.63 oz) |
Mounting | Suspended ceiling mount, wall/ceiling mount, pole mount |
Environmental | |
Operating temperature | -10°C (14 F) ~ +55°C (+131 F) |
Humidity | 0 ~ 90 % (non-condensing) |
Regulatory | |
Certification | FCC/IC/CE |