EN
Mantar, outdoor cabinet RSZ-160/18/14 - FTTH 24J designed for outdoor installation, for FTTx network. Simple construction allows for free arrangement of optical fibers. In the upper part of the cabinet there are two specially profiled inserts, designed for mounting optical network elements such as adapters, welding trays. The insert in the operator section has a capacity of 2J (2 holes for SC Simplex adapters) and the client has a capacity of 24J (24 holes for SC Simplex adapters). The inserts, which can be tilted and completely dismantled, allow for comfortable work. The holders for mounting the inserts - located on the back panel - also serve as holders for cable/steel coils. Fully disassembled door with a poured out polyurethane gasket, and a sealing plate in the lower part of the post, provide an IP65 degree of protection on the upper part of the cabinet. Additional equipment: welding trays, adapters. Note: Fibre optic accessories shown in the pictures are not part of the set!
Cabinet elements are joined by means of wedging technology, which ensures continuity of the protective coating. If the cabinet is to stand alone, it is recommended to pour min. 10 cm layer of concrete, if we place it by the wall, fence, post - it is not necessary.
Basic technical parameters | |
Height | 1600 mm |
Width | 180 mm |
Depth | 140 mm |
Weight | 12kg |
A server cupboard usually has to be deeper than a telecommunication cupboard, provide airflow in a horizontal direction and have a much higher load capacity than a telecommunication cupboard.
The choice of a suitable crayfish cabinet depends on our requirements. There are standing and hanging cabinets: single-section and two-section. You can also take into account the mounting width expressed in inches, the height of the modules expressed in U units, width, depth and mounting depth.
This cabinet is used to conveniently store all kinds of ICT and telecommunications equipment in one place.