Mantar SM-64/55/41 Rack 19" | Airtight cabinet | IP65, depth 410 mm
CODE: SM-64/55/41
Contact
Account
Favorite
Cart
Mantar, cabinet SM-64/55/41 RACK 19" 12U hermetic IP65, corrosion resistant (covered by a 5-year warranty), hermetically sealed, sheet metal with Magnelis® coating 1.0mm thick, light grey colour. Assembly of the enclosure (suggested due to its size) by means of pole brackets, wall mounting optionally. The enclosure does not include any cybranches (holes prepared for 50mm and 100mm spacing). Standard equipped with 6 holes ø24 mm located in the bottom wall and sealed with hermetic chokes. 19" 12U rack handles mounted vertically in standard equipment (distance between the front of handles and door is 80mm). The cabinet is a mechanical cover for telecommunication equipment and can be additionally equipped with 19" 1U shelf 200mm deep (mounted in a rack set), a set of holders for a post and PS 19" 1U shelf 24 x SC Duplex/Simplex.
| Basic technical parameters | |
| Height | 640 mm |
| Width | 550 mm |
| Depth | 410 mm |
| Weight | 28 kg |
A rack cabinet is a common name for standard 19" wide cabinets, racks and industrial equipment. (48.26 cm). It is designed for wall mounting in offices, network server rooms and control rooms of CCTV installations. It facilitates aesthetic location of network devices without tangle of cables.
A server cupboard must usually be deeper than a telecommunications cupboard. It should provide airflow in a horizontal direction and have a much higher load capacity than a telecommunication cabinet.
The choice of a suitable crayfish cabinet depends on our requirements. There are standing and hanging cabinets: single-section and two-section. You can also take into account the mounting width expressed in inches, the height of the modules expressed in U units, width, depth and mounting depth.
This cabinet is used to conveniently store all kinds of ICT and telecommunications equipment in one place.
