EN
The CCR1072 router is powered by a 72-core Tiler processor, each core is clocked to 1 GHz, and to take full advantage of this power the CCR1072 is equipped with eight independently connected 10G SFP+ ports and one Ethernet port for management purposes.
The device is equipped with installed system RouterOS L6, 16 GB built-in memory ECC RAM, color LCD touch screen, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, standard USB size, microSD and 2 M.2 slots for additional storage. Additionally, the device can handle more than 120 million packages per second.
Features / filters | |
Number of LAN ports | 8x [10G (SFP+)] , 1x 10/100/1000BaseTX (RJ45), |
AC input voltage | 100 - 240 |
Additional connectors / interfaces | 2x USB |
Built-in processor | Yes |
Compatible memory cards | MicroSD (TransFlash) |
CPU frequency | 1 GHz |
Data transfer rate | 10000 |
Depth | 315 |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Ethernet WAN | Yes |
Flash memory | 128 |
Harmonized System (HS) code | 85176990 |
Height | 44 |
Installed SFP+ modules quantity | 8 |
Internal memory | 16384 |
Management | By web browser, CLI - Command Line Interface, |
Number of CPU cores | 72 |
Operating system installed | RouterOS |
Operating temperature (T-T) | -20 - 60 |
Package weight | 5.12 |
Power consumption (typical) | 125 |
Power source type | AC |
Processor cores | 72 |
Processor frequency | 1000 |
Product colour | White |
Rack capacity | 1U |
Rack mounting | Yes |
RAM memory | 16GB |
Reset button | Yes |
Storage media | Flash |
Temperature monitoring | Yes |
Throughput | 80 |
Type of case | Metal, Rack (1U), |
Type of device power supply | Power supply |
USB ports quantity | 2 |
Voltage monitoring | Yes |
Weight | 3.8 |
Width | 443 |
Basic technical parameters | |
Nominal processor frequency | 1 GHz |
Number of processor cores | 72 |
Size of RAM | 16 GB |
Storage | 128 MB NAND |
10/100/1000 Ethernet ports | 1 |
Power supply | 2x standard IEC connector C14 110/220 V (two redundant power supplies) |
Supported input voltage | 12 V |
Processor temperature monitor | Yes |
Printed circuit board temperature monitor | Yes |
Voltage monitor | Yes |
Current monitor | Yes |
Dimensions | 443 × 315 × 40 mm |
Weight | 3.8 kg |
Licence level | 6 |
Operating system | RouterOS |
Processor | Tile-Gx72 CPU |
Maximum power consumption | 125 W |
Display | colour LCD, touch screen |
SFP | (8) 10G Ethernet SFP+ (Mini-GBIC; SFP module not included), DDMI support |
Extension | (1) microUSB 2.0 (1) Ordinary USB 2.0 port Full size smart card slot microSD socket (2) M.2 socket with x4 PCIE 2.0 support Key-M |
Serial port | RJ45 |
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in group "full". , log in again and delete the default administrator user.
Firewall, Routing, MPLS, VPN, Wireless, DHCP, Hotspot, QoS, Proxy and more.