EN
The package also includes a RJ45 SFP module (S-RJ01) already pre-installed in the first port, so you can use the Ethernet in one of the ports right out of the box. If this is not necessary, remove it to have access to all five SFP ports to use the 1.25 Gbit fiber modules.
Features / filters | |
Number of LAN ports | 5x [1G (SFP)] |
Built-in processor | Yes |
CPU frequency | 400MHz |
DC-in jack | Yes |
Depth | 48 |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 5 |
Height | 178 |
LED indicators | Yes |
Management | CLI - Command Line Interface, By web browser, |
Mobile network generation | No |
Operating system installed | RouterOS |
Operating temperature (T-T) | -20 - 70 |
Power consumption (typical) | 11 |
Product colour | White |
RAM memory | 128MB |
Storage media | Flash |
Type of case | Plastic |
Type of device power supply | Power supply |
Width | 125 |
Basic technical parameters | |
Processor | QCA8511 400 MHz |
RAM | 128 MB |
Memory | Flash 16 MB |
SFP | (5) 1.25G Ethernet SFP (Mini-GBIC) basket; DDMI support (1) module S-RJ01 Rj45 SFP |
Dimensions | 125 × 178 × 48 mm |
Licence level | 5 |
Operating temperature | -20 to 70° C |
Operating system | RouterOS |
Maximum power consumption | 11 W |
LEDs | 9x LEDs (1x user LED) |
You need space for a system package and additional packages that you need to upgrade. After uploading newer versions of the packages to your router, you should have at least 2 MB free disk space. If you have less than 2MB of space left, do not try to upgrade! First uninstall any unnecessary packages and then update the rest.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.
To update your software, you must download the latest package files (*.npk) from our website. Then connect to your router via FTP and upload the new packages to it using the binary transfer mode. Restart your router by issuing the command /system reboot.