MikroTik LDF 2 | CPE | RBLDF-2nD, 2,4GHz, 1x RJ45 100Mb/s


Mikrotik Routerboard RBLDF-2nD LDF (Lite dish feed) is an external wireless system with a built-in antenna, designed for mounting on offset satellite dishes. The antenna will act as a reflector, strengthening the signal.
This means you can use any available offset satellite dish to quickly deploy efficient long-range wireless connections. The offset mount is a universal 40mm diameter and the LDF board can easily be placed inside it. The device amplifies the signal and allows to establish a point-to-point connection over long distances. The radio operates in the 2.4 GHz band, uses 2x2 MIMO technology and is compatible with 802.11b/g/n standards.
Using sufficiently large antennas, the antenna gain of 30 dBi or more can be achieved. Just find a spare satellite dish with offset mount and place the LDF. The device is pre-installed with Mikrotik RouterOS level 3 firmware and is ready to use.
Features / filters | |
LAN standard | Fast Ethernet 10/100Mb/s |
Maximum wireless transmission speed | 300 Mb/s |
Number of LAN ports | 1x 10/100BaseTX (RJ45) |
Operating frequency | 2.4 GHz |
Wireless network standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
Built-in processor | Yes |
CPU frequency | 650 MHz |
Depth | 84 |
Device type | Client device |
Flash memory | 16 |
Height | 115 |
Input voltage | 10-28 |
Internal memory | 64 |
Operating temperature (T-T) | -40 - 70 |
Power consumption (max) | 7 |
Power source type | DC, PoE |
Processor frequency | 650 |
Processor model | QCA9533 |
RAM memory | 64MB |
Type of device power supply | Passive PoE |
Width | 84 |
Product code | RBLDF-2nD |
Architecture | MIPSBE |
CPU | QCA9533 |
Number of processor cores | 1x |
Nominal processor frequency | 650 MHz |
Dimensions | 84 mm x 84 mm x 115 mm |
Operating system | RouterOS |
Licence level | 3 |
Size of RAM | 64 MB |
Built-in memory | 16 MB |
Type of built-in memory | flash |
Operating temperature | From -40 ° C to 70 ° C |
PoE in | Passive PoE |
PoE at the input Voltage | 10–28 V. |
Number of DC inputs | 1 (PoE-IN) |
Power consumption (max) | 7 W. |
2.4 GHz wireless Maximum transmission speed | 300 Mbit/s |
Number of 2.4 GHz wireless communication chains | 2 |
2.4 GHz wireless standards | 802.11b/g/n |
dBi antenna gain for 2.4 GHz | 10dBi |
2.4 GHz wireless model | QCA9533 |
Ethernet port | 1x 10/100Mbps fast Ethernet port |
Frequency range | 2412 - 2484 MHz |
Polarisation | Double (2x2 MIMO / dual-chain) |
LEDs | 8x |
Set composition | The device Power supply 24 V 0.38 A PoE injector |
Brochure (ENG) | Download |
Client devices are kits that allow you to create point-to-point connections. They provide reliable and fast data transmission. The information flow is secure and mobile - within the range of the client device. They form a wireless network and work together. It is worth noting that the base stations have specific software that allows to manage individual points.
Using sufficiently large antennas, the antenna gain of 30 dBi or more can be achieved. Just find a spare satellite dish with offset mount and place the LDF.
PoE power supply allows you to power your network equipment via twisted-pair cable with simultaneous data transfer.