EN
Mikrotik MTAD-5G-30D3-PA is a professional dual antenna with a frequency 5 GHz and gain 30dBi, built to the highest industrial standards. It is designed to create radio bridges, point-to-point connections. Built to accommodate Basebox products without any problems, but thanks to the appropriate length of the included FlexGuide cable, it can be used for any wireless pole-mounted device.
The antenna is available with a standard mount for easy installation and setting.
Features / filters | |
Antenna frequency | 5 GHz |
Antenna type | Directional |
Energy gain | 21dBi - 30dBi |
Application | Outdoor |
Connector type | 2x RP-SMA |
Cross polarization isolation | >40 dB |
Front-to-back ratio | 30 dB |
Horizontal beamwidth | 2.5° |
Numbers of pieces in the package | 6-pack |
Polarization | Vertical, Horizontal, |
Port-to-Port isolation | >40 dB |
Basic technical parameters | |
Product code | MTAD-5G-30D3-PA |
Beam width | +/- 2,5 ° |
The link | 2x RP-SMA Female (male thread) |
Cross-polarity | > 40 dB |
Diameter x depth | 70 x 45 cm (27.5 x 17.8 inches) |
Height adjustment range | +/- 15 ° |
Frequency range | 4.7-5.875 GHz |
Forward to back ratio | > 30 dB |
Impedance | 50 ohms |
External evaluation | ETSI EN 300 019-2-4 |
Size in packaging | 73x73x20 cm (29 x 29 x 8 inches) |
Weight in packaging | 8.4 kg |
Polarisation | Vertically and horizontally |
Range of pole mounting diameter | 3 to 10 cm (1.2 to 3.9 inches) |
Port to port isolation | > 40dB min |
Rated power | 100 W. |
Headlamp | Aluminium |
Standards | EN 302 326 DN1, DN2, DN3, DN5 |
Tested ambient temperature | From -50 ° C to 80 ° C |
VSWR | ≤ 1.4 type, ≤ 1.8 max |
Weight | 5.7 kg |
Wind load | 181.4 kg |
Wind survivability | 201 km/h |
Included | 2x FlexGuide RPSMA RF (RP-SMA-male-RP-SMA-male) cables, Mounting bracket RB series BASEBOX, Cable insulation tape for RF x 2 slices, Precise adjustment mechanism (visualization) |
Since PoE allows the use of a single cable for power and data transmission, this solution saves money on purchasing and dragging cables for network devices and VoiP phones.
Access Point mode is used to connect wireless clients (wireless network cards) such as laptops, desktops, PDAs.
The mANT30 PA version differs from the mANT30 by its Precision Alignment mount (PA), which allows the angle of inclination to be adjusted even in the horizontal plane.