EN
MikroTik NetMetal 5 RB922UAGS-5HPacD-NM is equipped with miniPCI-express slot, SIM slot for 3G/4G device or additional 2x2 high-power 2x2 dual-chain 802.11ac wireless card and two RP-SMA connectors for external antennas. The device can work as AP/CPE/Point-to-Point.
NetMETAL is a brand new 802.11ac product in a waterproof metal housing. Its robust construction is resistant to the toughest conditions, but at the same time it is easy to use and can be opened and closed with one hand. The rugged aluminum housing also acts as a reliable radio with high power output.
RTB-RB922UAGS-5HPacD-NM is equipped with 5GHz QCA9882 radio module, which works in 802.11ac standard. The board also has one Gigabit Ethernet port, which allows you to take full advantage of the 2x2 MIMO 802.11ac wireless network. CPU used in NetMetal 5 is QCA9557 720MHz CPU, with 128MB RAM. The device is also equipped with USB 2.0 port, SFP slot and miniPCI-e slot, to which you can connect an additional radio card.
Features / filters | |
5 GHz | Yes |
AC adapter included | Yes |
AC input voltage | 8 - 30 |
Built-in processor | Yes |
Channel bandwidth | 80 |
Chipset | QCA9882-BR4A-R |
Depth | 48 |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Harmonized System (HS) code | 85176990 |
Height | 247 |
Housing material | Aluminium |
I/O ports | SFP |
Internal | No |
Internal memory | 128 |
LED indicators | Status, Signal strength |
Modulation | 256-QAM |
Mounting kit | Yes |
Power consumption (max) | 19 |
Power over Ethernet (PoE) | Yes |
Processor frequency | 720 |
Processor model | Qualcomm Atheros QCA9557 |
Reset button | Yes |
USB 2.0 ports quantity | 1 |
USB connector type | USB Type-A |
Weight | 865 |
Width | 143 |
Wireless standard | 802.11a/n/ac |
Product code | RB922UAGS-5HPacD-NM |
Architecture | MIPSBE |
CPU | QCA9557 |
Number of processor cores | 1 |
Nominal processor frequency | 720 MHz |
Dimensions | 143x247x48mm |
Licence level | 4 |
Operating system | RouterOS |
Size of RAM | 128 MB |
Type of storage | NAND |
Operating temperature | From -40 ° C to 70 ° C |
Ethernet port | 1x rj45 Gigabit port with Auto-MDI/X |
SFP slot | 1x socket for SFP insert |
PoE in | Passive PoE |
PoE at the input Voltage | 8-30 V. |
Number of DC inputs | 1 (PoE-IN) |
Power consumption (max) | 19 W. |
5 GHz wireless transmission speed Max | 867 Mbit / s |
Wireless network standard | 802.11a/n/ac (dual chain) |
USB port | 1x USB 2.0 port |
5 GHz wireless model | QCA9882 |
Number of SIM sockets | 1 modem (miniPCIe card required) |
MiniPCI-e sockets | 1x |
PCB temperature monitor | Yes |
Voltage monitor | Yes |
RP-SMA antenna connectors | 2x |
Weight | 865g |
Set contents | DC 24V 1.2A power supply, Gigabit PoE adapter, DIN rail holder, metal clamp, two plastic bands. |
Press the button, switch on the device when the LED starts blinking - let go and have the factory settings in a few seconds.
Communication bus for connecting devices to the motherboard
It is a layer 2 protocol used to establish a point-to-point serial link mainly between two computers, rarely between a computer and a router or between two routers.