EN
Direct Attach cable is used to connect devices with a QSFP+ socket e.g. CRS326-24S+2Q+RM. The cable can be used in one cable cabinet and there is no need to use fiber optic pads and patchcords. Cable length is 1m and maximum transmission capacity is 40 Gb/s.
Features / filters | |
Bending radius | 3.5 |
Cable length | 1 |
Connector 1 | QSFP+ |
Connector 1 gender | Male |
Connector 2 | QSFP+ |
Data transfer rate | 40 |
Ethernet interface type | 40 Gigabit Ethernet |
Harmonized System (HS) code | 85447000 |
Jacket material | Polyvinyl chloride (PVC) |
Operating temperature (T-T) | 0 - 70 |
Product colour | Black |
Quantity per pack | 1 |
Basic technical parameters: | |
Product code | Q + DA0001 |
Cable length | 1m |
Connectors | QSFP + to QSFP + |
Data rate | 40 Gb/s |
Tested ambient temperature | 0 °C to +70 °C |
Material of the outer shell | PVC |
Cable | AWG 30 |
Brochure | Download |
First of all, check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10Gbps. Then make a choice regarding the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
The SFP RJ45 modules allow you to connect Ethernet cables to SFP sockets in network devices via a special module equipped with an RJ45 port.
This is an extension of the SFP standard adapted to the transmission rate of 10 Gbit/s.