EN
MicroTik RouterBoard R11e-5HacT is a new AC standard, with speeds up to 1.3Gbps and 256-QAM modulation and 80MHz channels. 802.11ac opens new possibilities and speeds that have never been possible before. R11e-5HacT is our first triple MIMO 3x3 chain 802.11ac card in miniPCIe format, ideal for any RouterBOARD card with miniPCIe slot such as RB953, RB912, RB800, BaseBox etc.
The card has built-in LEDs indicating wireless mode, connection status (connected, search, shutdown), TX and RX activity and wireless signal strength - just looking at the card will help with installation and tuning.
Features / filters | |
Antenna connector type | MMCX |
Bandwidth | 1.3 |
Chipset | QCA9880 |
Connectivity technology | Wired |
Harmonized System (HS) code | 85176990 |
Host interface | Mini PCI Express |
Interface | WLAN |
Internal | Yes |
Maximum data transfer rate | 54 |
Networking standards | IEEE 802.11a,IEEE 802.11ac,IEEE 802.11n |
Operating temperature (T-T) | -40 - 70 |
Basic technical parameters: | |
Product code | R11e-5HacT |
5GHz | Yes |
Number of antenna headers | 3 |
Frequency range | 4920 - 6100 MHz (depends on local legal arrangements) |
Standards | 802.11ac |
Maximum output power | 630 mW |
Format | miniPCIe |
Dimensions | 50x30x13 mm |
Connections | 3x MMCX |
Channels | 20 / 40 / 80 MHz |
Additionally | 9 LED indicators ESD security |
Compatibility with RouterOS | Yes |
Data rate | 1.3 Gb / s |
Storage size | 4 KB |
Type of storage | FLASH |
Wi-Fi generation | Wi-Fi 5 |
Wireless transmission features | |
TX/RX at MCS0 | 28 dBm / -96 dBm |
TX/RX at MCS7 | 27 dBm / -77 dBm |
TX/RX at MCS9 | 24 dBm / -72 dBm |
TX/RX at 6 Mb | 28 dBm / -96 dBm |
TX/RX at 54 Mb | 28 dBm / -81 dBm |
Brochure (ENG) | Download |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
MiniPCI is a communication bus used to connect devices to the motherboard in laptops.