![MikroTik RB1100AHx2 | Router | 13x RJ45 1000Mb/s, 1x microSD Ilość portów LAN13x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/500/910_1.webp?20989284221)
RB1100AHx2 is a router that can be mounted in a rack cabinet, has a dual core processor, can reach up to million packets per second and supports hardware encryption!
It has thirteen Gigabit Ethernet ports, two 5-port switch groups and the ability to bypass Ethernet. The set includes 2 GB of SODIMM RAM memory, one slot for microSD card, a beeper and serial port.
| Features / filters | |
| Number of LAN ports | 13x [10/100/1000M (RJ45)] |
| AC input voltage | 110 - 220 |
| Additional connectors / interfaces | 1x microSD |
| Built-in processor | Yes |
| Cables included | AC |
| Cabling technology | 10/100/1000Base-T(X) |
| Compatible memory cards | MicroSD (TransFlash) |
| CPU frequency | 1 GHz |
| Depth | 176 |
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN | Yes |
| Ethernet LAN (RJ-45) ports | 13 |
| Ethernet LAN data rates | 10,100,1000 |
| Ethernet WAN | Yes |
| Height | 44 |
| Internal memory | 2048 |
| LED indicators | Yes |
| Management | By web browser, CLI - Command Line Interface, |
| Number of CPU cores | 2 |
| Operating temperature (T-T) | -30 - 60 |
| PoE input | Yes |
| Power over Ethernet (PoE) | Yes |
| Power source type | AC |
| Processor cores | 2 |
| Processor frequency | 1000 |
| Processor model | NXP P202ASSE2KFB |
| Product colour | Aluminium |
| Rack capacity | 1U |
| Rack mounting | Yes |
| RAM memory | 2GB |
| Type of case | Metal, Rack (1U), |
| Type of device power supply | Power supply, Passive PoE, |
| Weight | 1.2 |
| Width | 422 |
| Basic technical parameters | |
| CPU | PowerPC P2020 dual-core 1066MHz processor with IPsec accelerator. |
| Memory | SODIMM DDR 2GB |
| Boot loader | RouterBOOT, 1Mbit Flash |
| Data memory | Built-in NAND memory chip, one microSD slot |
| Ethernet | (13) 10/100/1000 Mbit/s Gigabit with Auto-MDI/X function |
| Ethernet | Includes a switch to enable Ethernet bypass mode on two ports. |
| miniPCI | No |
| Serial port | (1) Asynchronous serial port DB9 RS232C |
| Appendices | Switch reset, sounder, voltage and temperature sensors |
| Power options | Built-in power supply (standard IEC connector C14 110/220 V), PoE (12-24 V on port 13) |
| Fan | Built-in fans |
| Dimensions of the housing | 44 × 176 × 442 mm |
| Weight | 1275g, 365g plate only |
| Operating system | MicroTik RouterOS, level 6 license. |
MikroTik RouterOS is the operating system of the router and software that allows the PC or Mikrotik RouterBoard to be a dedicated router.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in group "full". , log in again and delete the default administrator user.
