EN
The RB2011iL-IN model is the basic model of the MikroTik router and has five Gigabit Ethernet ports, five Fast Ethernet ports and PoE support. It runs on a powerful 600 MHz Atheros processor, has 64 MB RAM and RouterOS software with level 4 license.
Port #10 supports PoE output. This port can be used to power other devices supporting power supply via PoE with the same voltage as applied to RB2011iL-IN. Maximum load on the port is 500mA. The set includes a device in a housing and a power supply. The set for mounting the device on the wall is available as an accessory.
Features / filters | |
Number of LAN ports | 5x 10/100BaseTX (RJ45), 5x 10/100/1000BaseTX (RJ45), |
Basic switching RJ-45 Ethernet ports quantity | 10 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Built-in processor | Yes |
Compatible operating systems | RouterOS |
CPU frequency | 600 MHz |
Depth | 86 |
Fast Ethernet (copper) ports quantity | 5 |
Gigabit Ethernet (copper) ports quantity | 5 |
Harmonized System (HS) code | 85176990 |
Internal memory | 64 |
LED indicators | Yes |
Management | By web browser, CLI - Command Line Interface, |
Memory type | DDR-SDRAM |
Number of CPU cores | 1 |
Output voltage | 28 |
Power connector | DC-in jack |
Power consumption (max) | 8 |
Power over Ethernet (PoE) | Yes |
Processor frequency | 600 |
Processor model | Qualcomm Atheros AR9344 |
Product colour | Red |
RAM memory | 64MB |
Type of case | Metal |
Type of device power supply | Power supply, Passive PoE, |
Weight | 151 |
Width | 214 |
Basic technical parameters | |
CPU frequency | 600 MHz |
Number of CPU cores | 1 |
Architecture | MIPS-BE |
RAM | 64 MB |
Number of 10/100 Ethernet ports | 5 |
10/100/1000 Ethernet ports | 5 |
Socket | 1 |
Supported input voltage | 8 V - 28 V |
PoE input | Yes |
PoE output | Yes |
Dimensions | 230×90×25 mm |
Operating temperature | -35C to +65C |
RouterOS level license | 4 |
CPU | AR9344-DC3A-R |
Max. power consumption | 8W |
No, it can't.
You can change your assigned ports using the /ip service
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in group "full". , log in again and delete the default administrator user.