EN
RB2011iLS-IN has 11 ports: 1 SFP port Gigabit, 5 Gigabit Ethernet, and additionally 5 Fast Ethernet 100Mb> ports. The router can be powered through the power port or through PoE. No SPF module is included. RB2011iLS supports all 1.25 G SFP modules that are part of the SFF specification for SFP transmitters. RB2011LS does not support PON (passive optical network) equipment.
The device is recommended for use with the MicroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35 / 53LC20D (not included). It is powered by a new next generation Atheros network processor with 600MHz 74K MIPS and has 64 MB of RAM and a license for RouterOS Level4. The router has a PoE output function on port # 10 - it can power other PoE enabled devices with the same voltage as the device. Maximum port load is 500mA. RouterBOARD 2011iLS-IN is supplied with the power supply.
Features / filters | |
Number of LAN ports | 5x 10/100BaseTX (RJ45), 5x 10/100/1000BaseTX (RJ45), 1x SFP (1,25G), |
AC adapter included | Yes |
Built-in processor | Yes |
Cabling technology | 10/100/1000Base-T(X) |
CPU frequency | 600 MHz |
DC-in jack | Yes |
Dual-band | No |
Ethernet interface type | Gigabit Ethernet |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 10 |
Ethernet LAN data rates | 10,100,1000 |
Ethernet WAN | Yes |
Gigabit Ethernet (copper) ports quantity | 5 |
Height | 86 |
Internal memory | 64 |
LED indicators | Yes |
Management | By web browser, CLI - Command Line Interface, |
Number of CPU cores | 1 |
Operating temperature (T-T) | -35 - 65 |
Power over Ethernet (PoE) | Yes |
Processor cores | 1 |
Processor frequency | 600 |
Processor model | Qualcomm Atheros AR9344-DC3A-R |
Product colour | Black, Bordeaux |
Rack mounting | No |
RAM memory | 64MB |
Type of case | Metal |
Type of device power supply | Power supply, Passive PoE, |
Width | 214 |
Basic technical parameters | |
SFP DDMI | Yes |
CPU Clocking | 600 MHz |
Number of CPU cores | 1 |
RAM Memory | 64 MB |
Architecture | MIPS-BE |
Number of 10/100M Ethernet ports | 5 |
Number of 10/100/1000 Ethernet ports | 5 |
Power port | 1 |
Supported input voltage | 8 V to 28 V |
PoE input | Yes |
PoE output | Yes |
Dimensions | 230×90×25 mm |
Operating system | RouterOS |
Ambient temperature during operation | -35C to +65C |
RouterOS license level | 4 |
CPU | Atheros AR9344 |
Power consumption | 6W |
Number of SFP ports | 1 |
Firewall, Routing, MPLS, VPN, Wireless, DHCP, Hotspot, QoS, Proxy and more.
Yes, you can use all the queuing management functions. Set the queue to the outgoing interface as you go through the router. This is not a bridge interface! The queue on the bridge interface is only involved for traffic generated by the router.
User name is 'admin' and there is no password (press 'Enter'). To change password use '/password' command.