EN
RB3011 is a new multi-port device that first uses the ARM architecture processor, providing higher performance than ever before. RB3011 has ten Gigabit ports divided into two groups of switches, SFPslot and for the first time a full-size USB 3.0 Superspeed port, for storage or external 3G / 4G modem.
The device is equipped with a 1U enclosure for rack mounting, an LCD touch screen, a serial console port and PoE output on the last Ethernet port.
Features / filters | |
Number of LAN ports | 10x [10/100/1000M (RJ45)] , 1x SFP (1,25G), |
Additional connectors / interfaces | 1x USB |
Cabling technology | 10/100/1000Base-T(X) |
CPU frequency | 1,4 GHz |
Depth | 92 |
Ethernet interface type | Gigabit Ethernet |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 10 |
Ethernet LAN data rates | 10,100,1000 |
Ethernet WAN | Yes |
Height | 44 |
Internal memory | 1024 |
Management | By web browser, CLI - Command Line Interface, |
Number of CPU cores | 2 |
Operating temperature (T-T) | -30 - 70 |
Power consumption (typical) | 10 |
Power over Ethernet (PoE) | Yes |
Product colour | Black |
Rack capacity | 1U |
Rack mounting | Yes |
RAM memory | 1GB |
Type of case | Metal, Rack (1U), |
Type of device power supply | Passive PoE, Power supply, |
USB ports quantity | 1 |
USB version | 3.2 Gen 1 (3.1 Gen 1) |
Width | 443 |
Basic technical parameters | |
CPU frequency | 1.4 GHz |
Number of processor cores | 2 |
Memory RAM | 1 GB |
Number of ports 10/100/1000 Mb/s | 10 |
System model | QCA8337-AL3C-R |
Power Jack | 1 |
PoE input | Yes. (passive PoE) |
PoE output | Yes (port 10) |
Supported input voltage | 10 V - 30 V |
Voltage monitor | Yes |
Temperature monitor | PCB Yes |
Dimensions | 443×92×44 mm |
Licence level | 5 |
Operating system | CPU RouterOS IPQ-8064 |
Maximum energy consumption | 10 W |
SFP port | 1 |
USB port | USB 3.0 type A |
Number of USB ports | 1 |
Serial port | RJ45 |
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in group "full". , log in again and delete the default administrator user.
Mikrotik RouterOS can do everything or even more than a Cisco router for a small part of the price of a Cisco router, and has the flexibility to upgrade, manage and maintain.
If you have not turned off the router, the filesystem has not been unmounted properly. During startup, RouterOS will perform a filesystem test. Depending on the size of your hard drive, this may take several minutes. Do not interrupt the file system test!