MikroTik RB4011iGS+5HacQ2HnD-IN | WiFi Router | Dual Band 1733Mb/s, 10x RJ45 1000Mb/s, 1x SFP+

CODE: RB4011IGS+5HACQ2HND-IN / EAN: 4752224002693

MikroTik RB4011iGS+5HacQ2HnD-IN | WiFi Router | Dual Band 1733Mb/s, 10x RJ45 1000Mb/s, 1x SFP+

CODE: RB4011IGS+5HACQ2HND-IN / EAN: 4752224002693
203,42 EUR without VAT (net)
Out of stock
Antenna type: External
Antennas quantity: 4
Built-in processor: Yes
DC-in jack: Yes
Show more parameters
Recommended products
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
* Offer valid for orders from 45EUR |Regulation|


New products



Mikrotik Routerboard RB4011iGS+5HacQ2HnD-IN

The RB4011iGS+5HacQ2HnD-IN routerboard is a wireless router that uses the incredibly powerful quad-core Cortex A15 from Amazon's Annapurna laboratory, just like the other RB1100AHx4 class carrier device. The router works in 2x2 MIMO technology for 2.4 GHz and 4x4 MIMO for 5 GHz. CPU supports hardware IPsec acceleration. It has 1 GB of RAM, so it can easily handle any task that has been configured in RouterOS. All this power is contained in a compact, black solid metal housing with a matte finish.

Mikrotik Routerboard RB4011iGS+5HacQ2HnD-IN

High throughput

The presented routerboard is a two-band, four-chain device with supported data throughput up to 1733 Mbps operating in 5 GHz. It is compatible with older devices, it also has 2 GHz dual-chain interface. The wireless router is equipped with large external antennas with 360 degrees of coverage. Ten Ethernet ports guarantee 1 Gbps throughput, while the SFP+ port provides an optional 10 Gbps link through a SFP+ module (not included).

The most important features:

  • 10 Gigabit Ethernet ports
  • 1 GB of RAM
  • 1 SFP+ slot
  • RouterOS level 5
  • Maximum theoretical Wi-Fi throughput: 300 Mb/s (2.4 GHz) and 1700 Mb/s (5 GHz)
  • 2x2 MIMO for 2.4 GHz and 4x4 MIMO for 5 GHz
  • Protocols 802.11 b/g/n and 802.11 a/n/ac
  • Wireless router operating simultaneously in the 2.4 and 5 GHz bands
  • Switch chip RTL8367SB
  • AL21400 quad-core processor, 1.4 GHz clocked


Features / filters
Antenna type External
Antennas quantity 4
Built-in processor Yes
DC-in jack Yes
Depth 120
Ethernet LAN Yes
Ethernet LAN data rates 10,100,1000
Ethernet LAN interface type Gigabit Ethernet
Height 30
Output current 0.6
Output voltage 57
Power consumption (typical) 26
Power over Ethernet (PoE) Yes
Power source type DC
Processor cores 4
Processor frequency 1400
Processor model Annapurna Labs Alpine AL21400
Product colour Black
Product type Tabletop router
Top Wi-Fi standard Wi-Fi 5 (802.11ac)
Wi-Fi band Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards 802.11a,Wi-Fi 5 (802.11ac),802.11ad,802.11g,Wi-Fi 4 (802.11n)
Width 228
WLAN data transfer rate (max) 1733

Basic technical parameters

Product code RB4011iGS + 5HacQ2HnD-IN
Architecture ARM 32bit
CPU AL21400
Number of processor cores 4
CPU frequency 1400 MHz
Dimensions 228 x 120 x 30 mm
Operating system RouterOS
Licence level 5
Ethernet ports 10 Gigabit Ethernet ports 10/100/1000 Mbps
SFP+ slots 1
Serial Port RJ45
DC socket Yes, 12 - 57 V DC
PoE input Yes, port 1, 18 - 57 V DC (passive PoE)
PoE output Yes, port 10, up to 57 V DC (passive PoE)
Maximum power consumption 23 W (device only)
44 W using PoE
Built-in memory 512 MB
Switch chip RTL8367SB
Voltage monitoring Yes
PCB temperature monitoring Yes
Permissible operating temperature From -40° to 45°C
Set composition Device, 24 V power supply, 2.5 A, IEC cable
Wi-Fi frequency Dual-band (2.4 GHz/5 GHz)
Radio standards 802.11b/g/n
Polarisation 2.4 GHz - 2x2 MIMO (dual chain), 5 GHz - 4x4 MIMO (quad chain)
Data carrier NAND
Ethernet LAN interface type Gigabit Ethernet



MicroTik Routerboard brochure RB4011iGS+5HacQ2HnD-IN (ENG) Download
User Manual MikroTik Routerboard RB4011iGS+5HacQ2HnD-IN (ENG) Download


What is an SFP?

SFP modules allow to connect the main board of a switch, router or other device to a fiber optic cable (single-mode, multi-mode) or to a copper cable (twisted pair).

What is MicroTik RouterOS?

MikroTik RouterOS is an operating system based on Linux, which has been specially designed to build advanced access points and routers with bandwidth management capabilities.

What is the difference between 2.4 GHz and 5 GHz Wi-Fi?

The main, but not the only difference between these turnouts is speed.
Ideally, 2.4 GHz WiFi will support up to 450 or 600 Mbps, while 5 GHz can reach up to 1300 Mbps.
But beware! The maximum speed depends on the Wi-Fi standard used by the router, i.e. 802.11b, 802.11h, 802.11n or 802.11ac.

203,42 EUR without VAT (net)
Out of stock
Print version
Session will expire in:
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.