![MikroTik RB411UAHL | Router | 1x RJ45 100Mb/s, 1x miniPCI, 1x USB Ilość portów LAN1x [10/100M (RJ45)]](https://www.batna24.com/img2/500/1237_1.webp?20989284221)
Mikrotik RB411UAHL has one miniPCI slot, one Ethernet port and a USB port. This device should be used in external enclosure as an AP device or for installing point-to-point wireless link. The miniPCI slot allows to choose preferred model of wireless card. It is powered by Atheros 680MHz processor and has 64MB of RAM and Level4 RouterOS license.
| Features / filters | |
| Number of LAN ports | 1x 10/100BaseTX (RJ45) |
| Additional connectors / interfaces | 1x miniPCI, 1x USB, RS232, |
| CPU frequency | 680 MHz |
| Management | CLI - Command Line Interface, By web browser, |
| RAM memory | 64MB |
| Type of case | Without enclosure |
| Type of device power supply | Power supply, Passive PoE, |
| Basic technical parameters | |
| Nominal processor frequency | 680 MHz |
| RAM | 64 MB |
| Architecture | MIPS-BE |
| 10/100 Ethernet port | 1 |
| 10/100/1000 Ethernet port | 0 |
| MiniPCI | 1 |
| MiniPCI-e | 0 |
| USB port | 1 |
| Power supply | 8-30V DC |
| 802.3af | No |
| PoE in | 8-30V |
| Voltage monitor | Yes |
| Processor temperature monitor | No |
| PCB temperature monitor | No |
| Dimensions | 105x105mm |
| System | RouterOS |
| Operating temperature | -30C to +60C |
| Licence level | Level4 |
| Current monitor | No |
| CPU | AR7161 |
| Ports SFP | 0 |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.
