![MikroTik RB435G | Router | 3x RJ45 1000Mb/s, 5x miniPCI, 2x USB, 1x microSD Ilość portów LAN3x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/500/774_1.webp?20989284221)
Five miniPCI slots and three Gigabit Ethernet ports provide enough connectivity options to use RB435G as a central part of the network. Now with Gigabit ports to properly utilize all 802.11n speeds with Nv2 wireless network. Five miniPCI slots to use for four sectors and a backbone network or any other configuration you need - RB435G has the largest number of miniPCI slots of all our products. If you need to use multiple miniPCI cards - RB435G is your choice! Two USB 2.0 ports can be used to expand your storage, add a wireless 3G modem for backup, for mobile installation or all together.
| Features / filters | |
| Number of LAN ports | 3x 10/100/1000BaseTX (RJ45) |
| Additional connectors / interfaces | 5x miniPCI, 1x microSD, 2x USB, RS232, |
| Basic switching RJ-45 Ethernet ports quantity | 3 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Compatible memory cards | MicroSD (TransFlash) |
| CPU frequency | 680 MHz |
| DC input voltage | 8 - 30 |
| Depth | 155 |
| Internal memory | 256 |
| License level | 5 |
| Management | CLI - Command Line Interface, By web browser, |
| Memory card slot(s) | Yes |
| PoE input | Yes |
| Power connector | DC-in-jack |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) ports quantity | 1 |
| Power over Ethernet (PoE) voltage range | 8 - 30 |
| Processor cores | 1 |
| Processor frequency | 680 |
| Processor model | AR7161 |
| RAM memory | 256MB |
| Reset button | Yes |
| Serial ports quantity | 1 |
| Storage capacity | 64 |
| Storage media | Flash |
| Temperature monitoring | Yes |
| Type of case | Without enclosure |
| Type of device power supply | Power supply, Passive PoE, |
| USB port type | USB Type-A |
| USB ports quantity | 2 |
| Voltage monitoring | Yes |
| Weight | 165 |
| Width | 105 |
| Basic technical parameters | |
| Nominal processor frequency | 680 MHz |
| Number of processor cores | 1 |
| RAM | 256 MB |
| Architecture | MIPS-BE |
| 10/100 Ethernet port | 0 |
| 10/100/1000 Ethernet port | 3 |
| MiniPCI | 5 |
| MiniPCI-e | 0 |
| USB port | 2 |
| Memory card | 1 |
| Type of memory card | microSD |
| Jack power supply | 1 |
| 802.3af | No |
| PoE out | No |
| Supported input voltage | 8 V - 28 V |
| PoE in | Yes |
| Voltage monitor | Yes |
| Processor temperature monitor | No |
| PCB temperature monitor | Yes |
| Dimensions | 105mm x 154mm |
| System | RouterOS |
| Operating temperature | -30C to +60C |
| Licence level | 5 |
| DBI antenna gain | No |
| Current monitor | Yes |
| CPU | AR7161-BC1A |
| Ports SFP | No |
| Ports SFP+ | No |
| USB slot type | USB Type A |
| Number of chains | 0 |
| Serial port | RS232 |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.
