EN
RB450Gx4 is an Ethernet router with five Gigabit Ethernet ports, a serial port, 512 MB NAND memory and a microSD slot. Additionally, it supports 10V - 57V input via two power or PoE sockets (802.3af/at or passive PoE) and can provide PoE output for Ethernet port #5.
The device has a quad-core ARM processor, has 1 GB of RAM and supports IPsec hardware encryption. The device is powered by RouterOS software, which will turn this powerful system into a highly advanced router, firewall or bandwidth manager.
Features / filters | |
Number of LAN ports | 5x 10/100/1000BaseTX (RJ45) |
Additional connectors / interfaces | 1x microSD, RS232, |
Built-in processor | Yes |
Cabling technology | 10/100/1000Base-T(X) |
Compatible memory cards | MicroSD (TransFlash) |
Connectivity technology | Wired |
CPU frequency | 717 MHz |
Depth | 115 |
Ethernet interface type | Gigabit Ethernet |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 5 |
Ethernet LAN data rates | 10,100,1000 |
Harmonized System (HS) code | 85176990 |
Input voltage | 10 - 57 |
Internal memory | 1024 |
Management | CLI - Command Line Interface, By web browser, |
Networking standards | IEEE 802.3af,IEEE 802.3at |
Operating temperature (T-T) | -40 - 70 |
PoE input | Yes |
Processor frequency | 716 |
Product colour | Green |
RAM memory | 1GB |
Type of case | Without enclosure |
Type of device power supply | Passive PoE, Power supply, |
Width | 90 |
Basic technical parameters | |
CPU | IPQ-4019 |
Nominal processor frequency | 716 MHz |
Number of processor cores | 4 |
Size of RAM | 1 GB |
Storage | 2 MB Flash, 512 MB NAND |
10/100/1000 Ethernet ports | 5 |
PoE input | 802.3af/at |
PoE output | Passive |
MicroSD sockets | 1 |
Serial port | RS232 |
Supported input voltage | 10 - 57 V (two DC sockets), 12 - 57 V (PoE input) |
Dimensions | 90 × 115 mm |
Operating temperature | -40°C +70°C |
Operating system | RouterOS |
Licence level | 5 |
Maximum power consumption | 5 W |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.