EN
MIKROTIK RB750GR2 is a small five-port Gigabit router Ethernet in a nice plastic housing for managing a wired network. The device is equipped with a powerful 720MHz processor, 64MB RAM, five Gigabit Ethernet ports and a RouterOS L4 license. The device supports 6 - 30 V input voltage and passive PoE input.
Features / filters | |
Number of LAN ports | 5x 10/100/1000BaseTX (RJ45) |
CPU frequency | 720 MHz |
Management | By web browser, CLI - Command Line Interface, |
PoE input | Yes |
RAM memory | 64MB |
Type of case | Plastic |
Type of device power supply | Passive PoE, Power supply, |
Basic technical parameters | |
Nominal processor frequency | 720 MHz |
Number of processor cores | 1 |
Size of RAM | 64 MB |
Ethernet ports | (5) 10/100/1000 ports |
Supported input voltage | 6 - 30 V |
Printed circuit board temperature monitor | Yes |
Voltage monitor | Yes |
Switch model | QCA8337-AL3C-R |
Dimensions | 113×89×28 mm |
Licence level | 4 |
Operating system | RouterOS |
CPU | QCA9556-AR4A |
Maximum power consumption | 4 W |
Information brochure | Download |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Yes! Access to the router is protected by username and password. Additional users can be added if necessary. Each user group can be assigned specific rights. You can restrict access to the router, which is protected by a user name and password. Additional users can be added to the router; specific permissions can be set for user groups. Remote access to the router can be restricted by the user, IP address. Firewall filtering is the easiest way to protect your router and network.
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in full group". , log in again and delete the default administrator user.