EN
Mikrotik Routerboard RB912UAG-2HPnD is a very versatile device. It is a small wireless router with integrated 2.4 GHz high power wireless card and additional miniPCIe slot for 802.11 or 3G wireless card. Gigabit port allows you to fully utilize the potential of 802.11n wireless network. Integrated wireless card with performance up to 1000mW. It has a built-in 16kV ESD protection on both Ethernet and MMCX ports.
Features / filters | |
Wireless network standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
Basic switching RJ-45 Ethernet ports quantity | 1 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Depth | 105 |
Internal memory | 64 |
License level | 4 |
Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Number of SIM cards | 1 |
Power connector | DC-in-jack |
Power consumption (max) | 13.5 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 1 |
Power over Ethernet (PoE) voltage range | 8 - 30 |
Processor cores | 1 |
Processor frequency | 600 |
Processor model | AR9342 |
Reset button | Yes |
SIM card slot | Yes |
SIM card type | MiniSIM |
Storage capacity | 128 |
Temperature monitoring | Yes |
Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
USB port type | USB Type-A |
USB ports quantity | 1 |
Voltage monitoring | Yes |
Weight | 67 |
Wi-Fi band | Single-band (2.4 GHz) |
Width | 105 |
WLAN data transfer rate (max) | 983.7 |
Basic technical parameters | |
CPU frequency | 600 MHz |
Number of CPU cores | 1 |
Number of RAM | 64 MB |
Architecture | MIPS-BE |
10/100 Ethernet ports | 0 |
10/100/1000 Ethernet ports | 1 |
MiniPCI | 0 |
MiniPCI-e | 1 |
Wi-Fi standards | 802.11b/g/n |
USB | 1 |
Memory cards | 0 |
Socket | 1 |
Supported voltage values | 8V - 30V |
PoE in | Yes |
Voltage monitor | Yes |
CPU temp monitor | None |
PCB temp monitor | Yes |
Dimensions | 105x105mm |
Operating system | RouterOS |
Range of working temperature | -30C...+60C |
Licence level | Level4 |
Current monitor | None |
Ports SFP | 0 |
Max. energy consumption | 11W |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.