MikroTik S+2332LC10D is a set consisting of a pair of two-way SFP+ 10G modules. Both inserts can work together to achieve 10 Gbps transmission speed over a distance of up to 10 km. Bi-directional modules MikroTik S+2332LC10D transmit data on 1270 nm and 1330 nm wavelengths through single-mode optical fiber. The pair of SFP+ S+2332LC10D modules is equipped with LC ports. These devices support WDM technology.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Fiber type | SM (Single-Mode) |
| Numbers of pieces in the package | 1-pack |
| Type of SFP duplex | Wavy (WDM) |
| Wavelength | 1590 nm |
| Basic technical parameters | |
| Type of module | SFP+ |
| Transmission speed | 10 Gbps |
| Distance | 10 km |
| Output connectors | LC/UPC |
| Operating temperature | -40 to 70°C |
| Type of transmission | Single-Mode |
| Wavelengths | 1270 nm and 1330 nm |
| Kind of asshole | Waveform (WDM) |
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
