MikroTik S-55DLC80D is a single-mode SFP insert designed for data transmission at 1.25 Gbps. It has two LC/UPC connectors. Transmission is carried out on both channels of the module through single-mode optical fibers on 1550 nm wavelength. The single-mode SFP module enables data transmission over a distance up to 80 km. The SFP module S-55DLC80D operates in the temperature range from -40°C to 70°C.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 1,25 Gbps |
| Transmission distance | Over 20km |
| Fiber type | SM (Single-Mode) |
| Harmonized System (HS) code | 85176990 |
| Operating temperature (T-T) | -40 - 85 |
| SFP module slots quantity | 1 |
| Transmission distance (max) | 80 |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1550 nm, 1550, |
| Basic technical parameters | |
| Type of module | SFP |
| Transmission speed | 1.25 Gbps |
| Reach | 80 km |
| Type of transmission | Single-Mode |
| Wavelength | 1550 nm |
| Output connectors | 2 x LC |
| Optical output power | Max. 5 dBm |
| Average sensitivity Rx | -25 dBm |
| Maximum power consumption | -2 dBm |
| LOS De-assert | -26 dBm |
| LOS Assert | -40 dBm |
| Operating temperature | -40°C to 70°C |
We check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special module, which is equipped with an RJ45 port.
The module is compatible with CCR1072-1G-8S+, CCR1036 series, CCR1016-12S-1S+, CCR1009 series, CRS317-1G-16S+RM, CRS210-8G-2S+IN, CRS212-1G-10S-1S+IN, CRS326/CSS326 series, among others.
