EN
MikroTik S-85DLC05D is a multi-mode SFP 1.25G module with a double LC connector. The SFP S-85DLC05D module operates at 850 nm wavelengths, transmitting data through multi-mode fibers. It offers a data transfer rate of 1.25 Gbps over a distance up to 550 m. SFP 1.25G cartridge is compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S from MikroTik and with devices from other manufacturers.
Features / filters | |
Output connector | LC |
SFP module - port speed | 1,25 Gbps |
Transmission distance | Less then 1km |
Compatible products | RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN CCR1036-12G-4S |
Fiber optic connector | LC |
Fiber type | MM (Multi-Mode) |
Harmonized System (HS) code | 85369010 |
Interface type | SFP |
Maximum data transfer rate | 1250 |
Maximum transfer distance | 20000 |
Type of SFP duplex | Physical (two fibers) |
Wavelength | 850 nm, 850, |
Basic technical parameters | |
Transmission speed | 1.25 Gbps |
Wavelength | 850 nm |
Type of transmission | Multi-Mode |
Distance | 550 m |
Output connectors | 2 x LC |
Type of module | SFP |
Duplex type | Physical (two fibres) |
Operating temperature | -40°C to 70°C |
The SFP RJ45 module allows you to connect Ethernet cables to SFP sockets in network devices via a special module equipped with an RJ45 port.
We check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
The module is compatible with CCR1072-1G-8S+, CCR1036 series, CCR1016-12S-1S+, CCR1009 series, CRS317-1G-16S+RM, CRS210-8G-2S+IN, CRS212-1G-10S-1S+IN, CRS326/CSS326 series, among others.