MikroTik S-C51DLC40D | SFP Module | CWDM, 1,25Gb/s, 1510nm, 2x LC, 40km, DDM, Single mode
CODE: S-C51DLC40D / EAN: 5903148916835
Contact
Account
Favorite
Cart
MikroTik S-C51DLC40D is an SFP fiber optic insert designed for data transfer at speed 1.25 Gbps. It transmits data through single-mode optical fibers over a maximum distance of 40 km. This SFP module operates at 1510 nm and supports CWDM technology. The S-C51DLC40D MicroTik insert has 2 LC ports.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 1,25 Gbps |
| Transmission distance | Over 20km |
| Digital Diagnostics Monitoring (DDM) | Yes |
| Fiber optic connector | LC |
| Fiber ports quantity | 2 |
| Fiber type | SM (Single-Mode) |
| Interface type | SFP |
| Maximum data transfer rate | 1250 |
| Maximum transfer distance | 40000 |
| Number of products included | 1 |
| Product colour | Nickel |
| SFP transceiver standard | CWDM |
| SFP transceiver type | Fiber optic |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1510 nm, 1510, |
| Basic technical parameters | |
| Type of module | SFP |
| Transmission speed | 1.25 Gbps |
| Distance | 40 km |
| Type of transmission | Single-Mode |
| Wavelength | 1510 nm |
| Output connectors | 2 x LC |
| Kind of asshole | CWDM |
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
