MikroTik S+C53DLC10D is an SFP+ insert designed for data transmission at a speed of 10 Gbps over a distance of to 10 km. Data transmission takes place at the wavelength of 1530 nm through a single-mode optical fiber. SFP+ S+C53DLC10D module is equipped with 2 LC output connectors and supports CWDM technology.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Fiber type | SM (Single-Mode) |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1530 nm |
| Basic technical parameters | |
| Type of module | SFP+ |
| Transmission speed | 10 Gbps |
| Reach | 10 km |
| Type of transmission | Single-Mode |
| Kind of asshole | CWDM |
| Output connectors | 2 x LC |
| Wavelength | 1530 nm |
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
First we check if the ports in the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
