MikroTik S+C59DLC10D | SFP+ Module | CWDM, 10Gb/s, 1590nm, 2x LC, 10km, DDM, Single mode
CODE: S+C59DLC10D / EAN: 5903148916798
Contact
Account
Favorite
Cart
MikroTik S+C59DLC10D is a single-mode SFP+ module that allows you to transfer data at a speed of 10 Gbps over a distance of to 10 km. The SFP+ S+C59DLC10D supports CWDM technology and is equipped with 2 LC ports. Transmission takes place through single-mode optical fibers at 1590 nm wavelength.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Digital Diagnostics Monitoring (DDM) | Yes |
| Fiber optic connector | LC |
| Fiber ports quantity | 2 |
| Fiber type | SM (Single-Mode) |
| Interface type | SFP+ |
| Maximum data transfer rate | 10000 |
| Maximum transfer distance | 10000 |
| Number of products included | 1 |
| Product colour | Nickel |
| SFP transceiver standard | CWDM |
| SFP transceiver type | Fiber optic |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1590 nm, 1590, |
| Basic technical parameters | |
| Type of module | SFP+ |
| Transmission speed | 10 Gbps |
| Reach | 10 km |
| Type of transmission | Single-Mode |
| Duplex type | CWDM |
| Wavelength | 1590 nm |
| Output connectors | 2 x LC |
| Operating temperature | 0°C to 70°C |
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
