MikroTik SXTsq Lite2 | CPE | RBSXTsq2nD, 2,4GHz, 1x RJ45 100Mb/s

CODE: RBSXTSQ2ND / EAN: 4752224004581

MikroTik SXTsq Lite2 | CPE | RBSXTsq2nD, 2,4GHz, 1x RJ45 100Mb/s

CODE: RBSXTSQ2ND / EAN: 4752224004581
37,02 GBP without VAT (net)
Maximum wireless transmission speed: 300 Mb/s
Number of LAN ports: 1x 10/100BaseTX (RJ45)
Operating frequency: 2.4 GHz
Show more parameters

About product

MicroTik SXTsq Lite2 Client device

SXTsq Lite2 is a compact and lightweight wireless outdoor device with a built-in antenna. Ideal for point-to-point connections or as a CPE unit. It is compact, weather-resistant, and easy to mount. It is designed to operate in the 2.4 GHz band, supports IEEE 802.11 b/g/n standard and uses 2x2 MIMO (dual-chain) technology. The maximum theoretical throughput is 300 Mbps.


The SXTsq Lite2 antenna is twice as thin

The SXTsq Lite2 retains a 10 antenna and a 60° wide beam like the SXT Lite2, our previous model, but the design of the antenna has been improved and its size has been drastically reduced - the SXTsq is twice as thin.


SXTsq Lite2 easy to install and configure

The housing has holes for direct fixing of the clamp in three different mounting locations, with the possibility of mounting on horizontal railings. The device has one 10/100 Mbit Ethernet port. There is also an easily accessible grounding that protects the device from lightning.


The device and the set contains everything that is important:

  • The device contains one 10 / 100Mbi Ethernet port
  • Powered by passive PoE
  • input voltage range is 10 - 30 V DC
  • 24 V, 0.38 A and PoE injectors are included in the package

The most important features:

  • maximum transmission power 30 dBm
  • integrated antenna with 10 dBi gain
  • operation in the 2.4 GHz band
  • Double polarity (dual-chain / 2x2 MIMO)
  • Passive power supply via PoE
  • Easy installation with the All-in-One housing
  • LEDs indicating signal strength
  • ESD protection up to 10kV ESD on the radio

Wireless network specifications:

Wireless network



Features / filters
LAN standard Fast Ethernet 10/100Mb/s
Maximum wireless transmission speed 300 Mb/s
Number of LAN ports 1x 10/100BaseTX (RJ45)
Operating frequency 2.4 GHz
Wireless network standards IEEE 802.11a, IEEE 802.11n,
2.4 GHz Yes
5 GHz No
AC input voltage 10 - 30
Antenna features Integrated antenna
Antenna gain Under 10dbi
Built-in processor Yes
CPU frequency 650 MHz
Depth 129
Device type Client device
Ethernet LAN (RJ-45) ports 1
Ethernet LAN data rates 10,100
Flash memory 16
Harmonized System (HS) code 85176990
Height 34
Internal Yes
Internal memory 64
Maximum data transfer rate 100
Networking standards IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Operating temperature (T-T) -40 - 70
Package depth 180
Package height 45
Package weight 492
Package width 255
Power consumption (max) 5
Power over Ethernet (PoE) Yes
Product colour White
RAM memory 64MB
Type of device power supply Passive PoE
WAN connection Ethernet (RJ-45)
Weight 295
Width 129

Basic technical parameters

Product code RBSXTsq2nD
Architecture MIPSBE
Number of processor cores 1
CPU frequency 650 MHz
Dimensions 129 x 129 x 34 mm
Memory RAM 64 MB
User memory 16 MB Flash
Network interface 1 x RJ-45 10/100Mbps Fast Ethernet
Operating frequency range 2412 - 2484 MHz
IEEE protocols IEEE 802.11 b/g/n
Polarisation Double (2x2 MIMO / dual-chain)
Antenna gain dB 10 dBi
Width of the main beam 60°
PoE power supply Yes. (passive PoE)
PoE supply voltage range 10 - 30 V DC
Maximum power consumption 5 W
Weight 295 g
Operating system RouterOS
Permissible operating temperature (tested) -40 to 70 degrees C



Brochure (ENG) Download
Short guide (ENG) Download
Selection guide for PtP links (ENG) Download
PtMP link selection guide (ENG) Download


how to start using MikroTik SXTsq Lite2 RBSXTsq2nD ?

  • Connect the Ethernet cable to the Ethernet port.
  • The other end of the Ethernet cable to the connected PoE inector
  • Connect the PoE injector to a network switch or computer
  • Connect the supplied power supply to the PoE injector to start the unit.
  • Set the LAN computer's IP configuration to automatic (DHCP).
  • The default IP address of the device is, open this address in your web browser to start the device.
  • configuration. User name is admin and there is no password.
  • We recommend that you click the "Check for updates" button and update RouterOS software to the latest version to ensure best performance and stability.
37,02 GBP without VAT (net)
Added to cart
On stock
Session will expire in:
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.