EN
Microtik LTE Routerboard wAP 4G kit is a small, weatherproof wireless access point with a built-in mobile modem that supports 2G, 3G and 4G (LTE) connections. Connect to the built-in wAP 802.11b/g/n wireless network and access the LTE network from your phone or any other wireless device. WAP LTE also has one port 10/100 Ethernet LAN for wired devices. WAP LTE is equipped with Mikrotik firmware RouterOS level 4.
LTE cards are connected to two internal antennas with U.FL connectors, so if you want, you can disconnect the connectors and add your own external LTE antenna for longer range. The unit has several power options - 9-30V PoE input via Ethernet port, DC socket and Automotive connector, very useful in a car, bus or train.
The wAP 4G set (RBwAPR-2nD&R11e-4G) contains an LTE modem supporting LTE FDD 3, 7, 20 and 31 and LTE TDD 41n, 42 and 43 bands.
Features / filters | |
Communication type | 4G/LTE, Wi-Fi, |
LTE category | Cat.4 (150Mb/s Download, 50Mb/s Upload) |
Maximum wireless transmission speed | 300 Mb/s |
Number of LAN ports | 1x 10/100BaseTX (RJ45) |
Operating frequency | LTE |
Wireless network standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, |
2.4 GHz | Yes |
5 GHz | No |
AC adapter included | Yes |
AC input voltage | 9 - 30 |
Additional connectors / interfaces | 1x miniPCI-e, SIM, |
Antenna gain level (max) | 2 |
Built-in processor | Yes |
DC-in jack | Yes |
Depth | 85 |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100 |
Height | 30 |
Internal | No |
LED indicators | Yes |
LTE bands | B20 (800MHz), B3 (1800MHz), B7 (2600MHz), B31 (450MHz), B41n (2500MHz), B42 (3500MHz), B43 (3700MHz), |
Maximum data transfer rate | 300 |
Networking standards | IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
Operating temperature (T-T) | -40 - 60 |
Placement | Table, Wall |
Power consumption (max) | 8 |
Power over Ethernet (PoE) | Yes |
Product colour | White |
RAM memory | 64MB |
Reset button | Yes |
Type of device power supply | Passive PoE, Power supply, |
Width | 185 |
Basic technical parameters | |
Architecture | MIPSBE |
CPU | QCA9531 |
Number of CPU cores | 1 |
CPU frequency | 650 MHz |
Dimensions | 185 × 85 × 30 mm |
Licence level | 4 |
Operating system | RouterOS |
Amount of RAM | 64 MB |
Internal memory | 16 MB |
Type of memory | FLASH |
Ambient temperature range | -40°C to 60°C |
PoE input | Passive PoE |
Input voltages PoE | 9-30 V |
Number of DC inputs | (3) (Automotive, DC jack, PoE input) |
DC jack input voltage | 9-30 V |
Input voltage of the car connector | 9-30 V |
Maximum energy consumption | 8 W |
Category 2G | Class12 |
Category 3G | R7 (21Mbps download, 5.76Mbps upload) |
LTE category | 4 (150Mbps download, 50Mbps upload) |
LTE FDD bands | 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) |
LTE TDD bands | 38 (2600MHz) / 40 (2300MHz) |
Number of 2.4 GHz chains | 2 |
Gain of the dBi 2.4 GHz antenna | 2 |
10/100 fast Ethernet ports | 1 |
Number of SIM slots | 1 Modem (Mini SIM) |
MiniPCI-e connectors | 1 |
PCB temperature monitor | Yes |
Voltage monitor | Yes |
User name is 'admin' and there is no password (press 'Enter'). To change password use '/password' command.
MikroTik RouterOS is the operating system of the router and software that allows the PC or Mikrotik RouterBoard to be a dedicated router.
No, the configuration will not be removed from one version family. When upgrading version families (for example V2.5 to V2.6) you may lose configuration of some features that have major changes. For example, when upgrading from V2.4, you must first upgrade to the latest version 2.4.