EN
wAP ac 4G is an extremely economical dual band (2.4 / 5 GHz) access point with weather-resistant wAP housing. It has two Gigabit Ethernet ports, you can use the device as a wired router with the LTEb> function using the Micro SIM slot. WAP ac 4G is designed to provide a strong and reliable connection in almost any situation and in any weather conditions. It can withstand temperatures from -30°C to +60°C and can be easily mounted on walls, ceilings or poles.
The Mikrotik device has a quad-core 716 MHz processor and 128 MB of RAM, capable of handling heavy loads. The dual-band 2.4 GHz and 5GHz system for dual simultaneous AP coverage will solve most of the interference problems in a crowded environment. MikroTik wAP ac 4G contains a LTE modem that supports international/US FDD 3 (1800MHz), 7 (2600MHz), 20 (800MHz) and 31 (450MHz), as well as TDD 41n (2500MHz), 42 (3500MHz) and 43 (3700MHz) LTE bands.
Features / filters | |
Communication type | Wi-Fi, 4G/LTE, |
LTE category | Cat.4 (150Mb/s Download, 50Mb/s Upload) |
Maximum wireless transmission speed | 1200 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Wireless network standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
2.4 GHz | Yes |
5 GHz | Yes |
AC input voltage | 10 - 57 |
Additional connectors / interfaces | 1x miniPCI-e, SIM, |
Antenna type | Internal |
Built-in processor | Yes |
DC-in jack | Yes |
Depth | 85 |
Ethernet LAN (RJ-45) ports | 2 |
Ethernet LAN data rates | 10,100,1000 |
Flash memory | 16 |
Height | 30 |
Internal memory | 128 |
LTE bands | B20 (800MHz), B3 (1800MHz), B7 (2600MHz), B31 (450MHz), B41n (2500MHz), B42 (3500MHz), B43 (3700MHz), |
Maximum data transfer rate | 867 |
Maximum data transfer rate (2.4 GHz) | 300 |
Maximum data transfer rate (5 GHz) | 867 |
Networking standards | IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
Operating temperature (T-T) | -30 - 60 |
Placement | Ceiling, Wall |
Power consumption (max) | 14 |
Power over Ethernet (PoE) | Yes |
Processor frequency | 716 |
Product colour | White |
RAM memory | 128MB |
Type of device power supply | PoE 802.3af/at, Power supply, |
Width | 185 |
Basic technical parameters | |
CPU | IPQ-4018 716 MHz quad-core processor |
Size of RAM | 128 MB |
Flash storage | 16 MB |
10/100/1000 Ethernet ports | 2 |
Wireless network | 2.4 GHz 802.11b/g/n dual-chain, 5 GHz 802.11a/n/ac dual-chain |
Rules for wireless communications | The specific frequency range will be limited by national regulations. |
Maximum gain of the wireless antenna | 2.5 dBi |
Maximum LTE antenna gain | 4 dBi (with u.FL connector) |
Antenna beam width | 360° |
LTE category | 4 (150 Mbps download, 50 Mbps upload) |
Micro-SIM socket | 1 |
Supported input voltage | DC jack 10 - 57 V Passive PoE 18-57 V or active 802.3af/at |
Dimensions | 185 × 85 × 30 mm |
Operating temperature | -30°C ... +60°C |
Operating system | RouterOS, license level 4 |
MiniPCIe sockets | 1 |
Maximum power consumption | 14 W |
Firewall, Routing, MPLS, VPN, Wireless, DHCP, Hotspot, QoS, Proxy and more.
Each router is configured by default with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.
You need space for a system package and additional packages that you need to upgrade. After uploading newer versions of the packages to your router, you should have at least 2 MB free disk space. If you have less than 2MB of space left, do not try to upgrade! First uninstall any unnecessary packages and then update the rest.