EN

MikroTik wAP ac | Access point | RBwAPG-5HacT2HnD, Dual Band, 1x RJ45 1000Mb/s

CODE: RBWAPG-5HACT2HND / EAN: 4752224001757

MikroTik wAP ac | Access point | RBwAPG-5HacT2HnD, Dual Band, 1x RJ45 1000Mb/s

CODE: RBWAPG-5HACT2HND / EAN: 4752224001757
83,15 GBP without VAT (net)
Out of stock
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: Dual Band (2.4GHz, 5GHz)
Wireless network standards: IEEE 802.11acIEEE 802.11nIEEE 802.11g
Show more parameters

About product

Mikrotik Routerboard RBwAPG-5HacT2HnD wAP ac

RBwAPG-5HacT2HnD wAP ac routerboard is a small size wireless access point. Waterproof housing allows to use the device outside the building to extend the Wi-Fi network for mobile devices and laptops, e.g. around the house or in the garden. The device works under Mikrotik RouterOS firmware level 4.

WAP AC RBWAPG-5HACT2HND

Frequencies

Wireless access point from MikroTik has one port Gigabit Ethernet. The wireless network operates in the 802.11ac standard, at frequencies of both 2.4 GHz and 5 GHz. The whole is closed in an aesthetic casing.

WAP AC RBWAPG-5HACT2HND operating frequencies

Weather-resistant

Access point wAP ac is weatherproof and can be mounted on any external building wall. The lower port cap is secured with a screw, which can be unscrewed by the owner with a special key (included).

MICROTIK CALCIUM AC RBWAPG-5HACT2HND WITH PSU, WHITE ENCLOSURE 720MHZ,

Test results

Test results

Block diagram

Block diagram

Specification

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency Dual Band (2.4GHz, 5GHz)
Wireless network standards IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g,
2.4 GHz Yes
5 GHz Yes
AC adapter included Yes
AC input voltage 11 - 57
Antenna gain level (max) 2
Depth 85
Ethernet LAN (RJ-45) ports 1
Ethernet LAN data rates 10,100,1000
Flash memory 16
Frequency band 5.15 - 5.875, 2.412 - 2.484
Height 30
Internal Yes
Internal memory 64
Maximum data transfer rate (2.4 GHz) 300
Maximum data transfer rate (5 GHz) 1300
Mounting kit Yes
Networking standards IEEE 802.11a,IEEE 802.11ac,IEEE 802.11n,IEEE 802.3af,IEEE 802.3at
Placement Ceiling, Pole, Wall
PoE adapter included Yes
Power consumption (max) 12
Power over Ethernet (PoE) Yes
Product colour White
Type of device power supply PoE 802.3af/at
Width 185

Basic technical parameters
Manufacturer MicroTik
Model RBwAPG-5HacT2HnD
CPU frequency 720 MHz
Number of CPU cores 1
Memory RAM 64 MB
Number of 10/100/1000 Ethernet ports 1
5GHz wireless chipset model QCA9880
5 GHz Wi-Fi standards 802.11a/n/ac
2.4 GHz Wi-Fi standards 802.11b/g/n
2.4 GHz wireless chipset model QCA9556
Supported input voltage 11 V - 57 V
PoE input 802.3at
Voltage monitoring Yes
PCB temperature monitoring Yes
Dimensions of the device 185 x 85 x 30 mm
Operating system RouterOS
Ambient temperature during operation -30° to 70°C
RouterOS license level 4
Antenna gain dBi 2
CPU QCA9556
Max. power consumption 12 W
Number of chains 3
Type of memory FLASH
Size of memory 16 MB
5 GHz wireless network specification
6 MBit/s TX (dBm): 25
RX (ReceiveSensitivity): -96
54 MBit/s TX (dBm): 25
RX (ReceiveSensitivity): -81
MCS0 TX (dBm): 25
RX (ReceiveSensitivity): -96
MCS7 TX (dBm): 24
RX (ReceiveSensitivity): -77
MCS9 TX (dBm): 23
RX (ReceiveSensitivity): -72
2.4 GHz wireless network specification
1 MBit/s TX (dBm): 25
RX (ReceiveSensitivity): -95
11 MBit/s TX (dBm): 25
RX (ReceiveSensitivity): 90
6 MBit/s TX (dBm): 25
RX (ReceiveSensitivity): -95
54 MBit/s TX (dBm): 23
RX (ReceiveSensitivity): -80
MCS0 TX (dBm): 25
RX (ReceiveSensitivity): -95
MCS7 TX (dBm): 22
RX (ReceiveSensitivity): -74

Support

Downloads:

WAP AC RBWAPG-5HACT2HND PSU (ENG) microTik brochure Download
User Manual MicroTik WAP AC RBWAPG-5HACT2HND PSU (ENG) Download

Faq

What is a MicroTik RouterOS?

MikroTik RouterOS is the operating system of the router and software that allows the dedicated router to be a PC or Mikrotik RouterBoard.

What is the default user name and password for RouterOS?

User name is 'admin', without password (press 'Enter'). To change password use '/password' command.

What is the PoE power supply for?

PoE allows you to use a single cable for power and data transmission, this solution saves money that you would have to spend on buying and dragging cables for network devices and VoiP phones.

83,15 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.