MIMOSA B5 is, without a doubt, the easiest to use and the highest bandwidth radio link of short and medium range for unlicensed 5GHz band. It is ideal for collocation applications, connecting subnetworks or buildings.
The carrier-class design and IP67 protection allow the use of the B5 and twin B5c even in the harshest environmental conditions.
A typical backhaul solution wastes a lot of frequency resources with each subsequent connection and additionally affects already working connections. The unique, high-precision GPS synchronization technology allows the B5 and B5c models to use the same channel repeatedly in the network and work seamlessly on up to 4 connections.
An unlicensed band can be unpredictable. With this in mind, MIMOSA has developed a unique multi-channel transmission and auto-regulation technology to protect the link from interference. This technology, called Auto-everything, implemented in the B5 and B5c models uses two independent radio channels and continuously monitors their performance. In addition, B5 also collects information from the remaining frequencies, especially their noise, to switch to the next least noise in case of deterioration in the current range. It looks like two intelligent connections in one.
B5 and B5c also offer extended capacity control. Dynamic mode automatically adjusts the connection to the traffic demand while maintaining very low latency ~1ms for sensitive services such as voice and video. The 50/50 and 72/25 manual modes allow for GPS synchronization and frequency collocation.
Immediately after installation, the link can be monitored via the free MIMOSA Cloud service. Thanks to the wide range of data collection and analysis, control over the link and diagnosing potential problems has never been easier.
|Max. throughput||Up to 1.5 Gbps IP of UL/DL aggregated traffic (1.7 Gbps PHY)|
|Delay||< 1 ms in Auto Mode|
|Wireless protocols||TDMA, TDMA-FD, AUTO TDMA|
|MIMO & Modulation||4x4:4 MIMO OFDM to 256QAM|
|Bandwidth||Single or dual 20/40/80 MHz channel|
|Operating frequency range||5150-5875 MHz depending on country of operation|
|Max output power||30 dBm (2-streams), 27 dBm (4-streams)|
|Beam width (3 dB)||8° ( HPOL and VPOL )|
|Vertical adjustment||± 20° mechanically adjustable|
|FTB (Principal to Reverse Radiation Ratio)||>30 dB|
|Insulation between polarities||>20 dB|
|Polarisation||Dual linear (horizontal and vertical)|
|Max power consumption||20 W|
|Power supply||Compliant with passive PoE or 802.3at, 48-56 V with surge protection to IEC61000-4-5|
|Overvoltage protection||6 kV|
|PoE power supply||Passive PoE, 50 V, 1.2 A|
|Dimensions||Diameter: 442 mm
Depth: 362 mm with mounting frame
|Weight||4.9 kg with mounting frame|
|Case||UV-resistant plastic exterior|
|Installation||Contained set for mounting on 30-90 mm diameter pipes|
|Ports||Gigabit Ethernet 10/100/1000-BASE-T|
|Degree of protection||IP67|
|Operating temperature||-40°C to +55°C|
|Moisture||5 is 100% condensing|
|FCC Part 15.407, IC RSS210, CE,
ETSI 301 893/302 502
UL/EC/EN/ 60950-1 + CSA-22.2
ETS 300-019-2-4 class 4M5