EN
If you're looking for a point-to-multipoint networking solution, the Mimosa C6x may be the perfect choice for you. The C6x is a client device that offers the latest Wi-Fi 6E standard and a maximum wireless throughput of 1.75 Gbps. In addition, the device has a gigabit Ethernet port and supports 2x2 MU-MIMO polarization , OFDMA and 1024QAM modulation.
One of the most important aspects of network devices is their ease of use. The Mimosa C6x is a user-friendly device that provides easy deployment and configuration. The device natively features 8 dBi amplification, as well as an X-series twist-on connector, which allows for the connection of a larger antenna should you need to extend the range of your connection. In addition, the C6x chassis is fully outdoor-ready and has an IP67 rating, meaning it is weatherproof.
The Mimosa C6x is a device that can be used in a variety of scenarios. The C6x allows the creation of point-to-multipoint and point-to-point networks. This means that the device can be used in a variety of industries, such as telecommunications, energy, agriculture and transportation. The Mimosa C6x offers stable and fast wireless connections, which can be especially important for systems that require high performance and low latency.
Reaching up to 1.75 Gbps in point-to-multipoint (PTMP) deployments, the C6x combines with new OFDMA scheduling and multi-user beamforming technologies in the A6 access point to enable massive subscriber scaling, advanced noise management and access to new low-noise 6 GHz bands.
The Mimosa C6x is a modern and easy-to-use device that offers stable and fast wireless connections. The device is user-friendly and can be used in many industries. If you are looking for a solution to create a point-to-multipoint or point-to-point network, then the Mimosa C6x is a device worth considering. With its functionality and easy operation, it can be an ideal choice for businesses and individual users.
Features / filters | |
Maximum wireless transmission speed | 1750 Mb/s |
Number of LAN ports | 1x [100/1000M (RJ45)] |
Operating frequency | 6 GHz |
Antenna gain | Under 10dbi |
Device type | Client device |
Horizontal beamwidth | 58° |
MIMO Type | MU-MIMO 2x2 |
Type of device power supply | Passive PoE, PoE 802.3af/at, |
Performance | |
Maximum throughput | 1.75 Gbps aggregated UL/DL IP (2402 Mbps PHY). |
Wireless protocols | Wi-Fi cooperation; Auto-TDD (future release); PTMP TDMA (future release) |
Modes | Default mode: PTMP client, 1.75 Gbps |
Radio | |
MIMO and modulation | 2x2, PTMP MU-MIMO client support, OFDMA, BPSK-1024QAM |
Bandwidth | Channels 20/40/80/160 MHz, tunable in 5 MHz increments |
Frequency range | PTMP: 5150-6425 MHz (limited by country of operation) |
Maximum output power | 24 dBm |
Sensitivity (MCS 0) | -87 dBm at 80 MHz -90 dBm at 40 MHz -93 dBm at 20 MHz |
Power | |
Maximum power consumption | 20 W |
Power method | Passive PoE |
PoE power supply: | Compatible with passive POE, 48-56 V (PoE injector not included) |
Physical parameters | |
Dimensions | Height: 178 mm (5 inches) Width: 113 mm (4.5 inches) Depth: 67 mm (2.6 inches) |
Weight | 0.7 kg (1.54 lbs) |
RF connector type | X-series twist-on |
Housing characteristics | Aluminum die-cast, UV-resistant lacquer, with UV-resistant plastic knurled lens |
Environment | |
Assembly | pole mounting straps |
Grounding | Grounding lug |
Degree of protection | IP67 |
Operating temperature | -40°C to 55°C (-40°F to 131°F) |
Operating humidity | 5 to 100% condensation |
Working height | 4420 m (14,500 ft) maximum |
Shock and vibration | ETS 300-019-2-4 class 4M5 |
Regulation and compliance | |
Certificates | FCC Part 15.407; ICRSS210; CE (RED, EMCD, LVD, RoHS); ETSI 301 893/302 502 |
RoHS compliance | Yes |
Security | EN 62638-1 |
Features | |
Gigabit Ethernet | 10/100/1000-BASE-T |
Management services | MMP support; Netconf (future support); SNMPv2c/v3; Syslog; HTTPS; HTML 5-based web interface; IPv4 and IPv6. |
Intelligent spectrum management | Active scanning monitors/records ongoing RF interference on all channels (no impact on services); Dynamic auto optimization of channel utilization and bandwidth |
Security | AES; PROMOTION; 802.1x authentication. |
QoS | Wi-Fi WMM interoperability mode SRS mode supports 4 user-configurable QoS levels supporting both CBWFQ and PQ |
VLAN | Q-in-Q, double tagging, VLAN management, PTMP per client VLAN |
Mimosa C6x Datasheet [EN]. | Download |
Yes. You can use a basic C6x 8 dBi radio without an antenna for short-distance connections.
This depends on the antenna size and regulatory power settings. The C6x and all X-series antenna options are available in Mimosa's Network Design Tool (NDT). Link modeling is free and very easy https://design.mimosa.co/designtool/ndt
Yes, Fleximount works with C6x and N5-X12, N5-X16 and N5-X20. For the N5-X25 (25 dBi antenna), the Fleximount XL is recommended.