EN

Orvaldi 850LED | UPS | 850VA/480W, 9Ah

CODE: 1085K / EAN: 5904006036443

Orvaldi 850LED | UPS | 850VA/480W, 9Ah

CODE: 1085K / EAN: 5904006036443
59,10 GBP without VAT (net)
Battery voltage in UPS: 12V
UPS power (VA): 850
Automatic Voltage Regulation (AVR): Yes
Battery capacity: 9
Show more parameters
UPS power (VA):

About product

Orvaldi 850LED - intelligent microprocessor control

TheOrvaldi 850LED is an advanced UPS in line-interactive topology based on full microprocessor control. The 850LED works with the latest technology and high efficiency to deliver power to the protected loads both in mains and battery operation. It differs from its predecessor in power available, battery type and size (specification below).

Orvaldi 850LED photo

This model stands out:

  • Economical UPS output voltage shape,
  • Very quiet operation during battery mode
Thanks to these features, the versatility of application of this device serves a wide range of switching power supplies (passive PFC) . If we encounter a situation in which there is a break in the supply voltage, it can immediately provide the energy stored in the batteries without any interruption. The switching time to battery operation and vice versa is typically carried out within 2 to 4 ms .

Specification

Features / filters
Battery voltage in UPS 12V
UPS power (VA) 850
Automatic Voltage Regulation (AVR) Yes
Battery capacity 9
Battery voltage 12
Depth 287
Form factor Compact
Height 142
Input frequency 50/60
Input operation voltage (max) 240
Input operation voltage (min) 220
Number of batteries supported 1
Output power 480
Output power capacity 8.5
Product colour Black
UPS topology Line-Interactive
Waveform Pseudo sine
Weight 4.9
Width 100

Voltage 220/230/240 VAC
Model ORVALDI 850 LCD USB
Input voltage range. 162-290 VAC
Frequency 60/50 Hz (automatic adjustment)
Voltage stabilization (Batt. Mode) ±10%
Frequency stabilization (Batt. Mode) 60 Hz or 50 Hz ±1 Hz
Voltage shape (Batt. Mode) Approximate sine wave
Switching time Typically 2-4 ms
Typical recharge time 4-6 hours to recharge to 90% capacity
Full Protection Overload, under-discharge and over-discharge protection
LED AC Mode, Battery Mode, Fault and Low Battery
Emergency operation Beep every 10 seconds
Low battery. Beep every second
Overload Beep every 0.5 sec.
Injury Continuous beep
Dimensions, L x W x H (mm) 287 x 100 x 142
Net weight (kg) 4.9
Noise level less than 40dB

Support

Operating Instructions Download

Faq

1. what is the Orvaldi 850LED used for?

Orvaldi 850LED is an emergency power supply unit. It supplies energy to the protected loads both during mains and battery operation. In case of interruption of the supply voltage, it can immediately supply the energy stored in the batteries without any interruption.

2. what is the difference between Orvaldi 850LED and 450LED?

The Orvaldi 850LED is a newer, larger and more powerful unit. The 850LED has a capacity of 850VA/480W. Battery type 12 V/9 Ah x 1. It is 8 cm longer than its predecessor, its dimensions are ( 287 x 100 x 142) cm.

3) What does the "green topology" that the 850LED is equipped with mean?

"Green topology" saves 50% more energy than other UPSs in this class.

4. what if constant power returns?

An auto-restart occurs when the AC power returns.

5. how long does it take to charge?

The built-in smart charger provides 90% charge in as little as 4 hours.

59,10 GBP without VAT (net)
Added to cart
-
+
On stock
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.