Most commonly used for protection for your servers and critical loads such as medical devices. The double conversion design can guarantee reliable and stable protection for all sensitive devices. It does not use energy that has been stored in batteries - it gives pure stabilized sine wave output (230V /- 1%). The device adopts wider allowable input voltage under harsh conditions.
| Features / filters | |
| Battery voltage in UPS | 12V |
| UPS power (VA) | 2000 |
| Audible alarm modes | Alarm when on battery, Fault, Low battery alarm, Overload alarm |
| Audible alarm(s) | Yes |
| Battery capacity | 7 |
| Battery recharge time | 4 |
| Battery voltage | 12 |
| Charging current | 1 |
| Cold start | Yes |
| Crest factor | 3:1 |
| Depth | 380 |
| Display type | LCD |
| ECO mode | Yes |
| Efficiency | 88 |
| Efficiency (On-line mode) | 85 |
| Emergency Power Off (EPO) | Yes |
| Form factor | Rackmount/Tower |
| Height | 88 |
| Input frequency | 45/55 |
| Input operation voltage (max) | 300 |
| Input operation voltage (min) | 110 |
| Input power factor | 0.99 |
| LED indicators | Yes |
| Noise level | 55 |
| Number of batteries supported | 2 |
| Operating relative humidity (H-H) | 20 - 90 |
| Operating temperature (T-T) | 0 - 40 |
| Output frequency | 50 |
| Output operation voltage (max) | 240 |
| Output operation voltage (min) | 208 |
| Output power | 1600 |
| Output power capacity | 2 |
| Output power factor | 0.8 |
| Output voltage Total Harmonic Distortion (THD) | 2 |
| Product colour | Black |
| Rack capacity | 2U |
| Serial interface | Yes |
| Serial interface type | RS-232 |
| Serial ports quantity | 1 |
| UPS topology | Double-conversion (Online) |
| Waveform | Sine |
| Weight | 13.2 |
| Width | 438 |
| Phases | Single-phase |
| Output power | 2000VA/1600W |
| Frequency range | 45Hz ~ 55Hz |
| Power Factor | ≧ 0.99 |
| Low Line Transfer | 160 VAC/140 VAC/120 VAC/110 VAC ± 5% |
| Low Line Comeback | 170 VAC /150 VAC/ 130 VAC /120 VAC± 5 % |
| High Line Transfer | 150 VAC ± 5 % or 300 VAC ± 5 % |
| High Line Comeback | 145 VAC ± 5% or 290 VAC ± 5% |
| Output voltage | 208/220/230/240 VAC |
| Synchronized Range | 48 ~ 52 Hz |
| Frequency (Batt. Mode) | 50 Hz ± 0.2 Hz |
| Peak factor | 3:1 |
| Voltage shape (Batt. Mode) | Pure stabilized sine wave |
| Switchover time | AC Mode to Batt. Mode: Zero, 4 ms (Typical) |
| Battery type | 12 V / 7 Ah |
| Charging current (max.) | 1.0 A |
| Typical recharge time | 4 hours to 90% capacity |
| Charging current (max.) | 8.0 A |
| Dimensions, L x W x H (mm) | 600 x 438 x 88 |
| Noise level | Below 50dB |
| Net weight (kg) | 25.7 |
Orvaldi V2000 ON-LINE 2U is ideal for servers, critical workstations and mission-critical equipment, very often used in medical applications.
Yes, thanks to the double conversion design, the Orvaldi V on-line power supply series guarantees reliable and stable protection for your devices.
The device switches over in 4 msin the event of a failure.
