Orvaldi VT1K on-line Tower | UPS | 1000VA/900W, 2x 9Ah

CODE: VWPP1K / EAN: 5904006036580

Orvaldi VT1K on-line Tower | UPS | 1000VA/900W, 2x 9Ah

CODE: VWPP1K / EAN: 5904006036580
257,38 EUR without VAT (net)
AVAILABILITY:
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Battery voltage in UPS: 12V
UPS power (VA): 1000
AC outlets quantity: 3
Show more parameters
UPS power (VA):
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
Save
* Offer valid for orders from 45EUR |Regulation|

ABOUT PRODUCT

ORVALDI VT1K on-line Tower

This model is ideal for servers, critical workstations and highly critical devices (used in the medical field).

ORVALDI VT1K photo

TheOrvaldi VT1K on-line Tower is equipped with the double conversion of the Orvaldi VT on-line power supply series, which guarantees reliable and stable protection for your sensitive devices. It can accept a wider allowable input voltage for harsh environments without using the energy stored in the batteries. It offers us pure stabilized sine wave output (230V /- 1%). This is protection for your servers and critical loads such as medical devices that will never fail.

What are the characteristics of the ORVALDI VT1K ON-LINE TOWER?

  • Features dual voltage conversion (no switching, on-line)
  • Equipped with an output power factor of 0.9
  • Wide input voltage range (110-300V AC)
  • User friendly and easy to use
  • ECO Mode
  • USB/RS-232 communication available
  • Additional: SNMP card and AS400 relay card

SPECIFICATION

Features / filters
Battery voltage in UPS 12V
UPS power (VA) 1000
AC outlets quantity 3
Audible alarm modes Alarm when on battery, Battery replacement, Fault, Low battery alarm, Overload alarm
Audible alarm(s) Yes
Battery capacity 9
Battery voltage 12
Cold start Yes
Crest factor 3:1
Depth 282
Form factor Tower
Height 220
Input frequency 40/70
Input operation voltage (max) 280
Input operation voltage (min) 120
Number of batteries supported 2
Output operation voltage (max) 240
Output operation voltage (min) 200
Output power 900
Output power capacity 1
Product colour Black
Serial interface type RS-232
Typical backup time at full load 5
UPS topology Double-conversion (Online)
USB port Yes
Waveform Pure sine
Weight 9.8
Width 145

Model ORVALDI VT1K on-line
Power 1000VA/900W
Voltage 220/230/240 VAC
Input voltage range 120-300VAC at 50% load
Frequency 40~70Hz (auto-adjustment)
Power factor ≥0.99 at 100% load
Voltage 200/208/220/230/240VAC (programowane)
Voltage stabilization (Batt. Mode) ±1%
Frequency stabilization (Batt. Mode) 60 Hz or 50 Hz ±0.5 Hz
Voltage shape (Batt. Mode) Pure sine wave
Peak factor 3:1
Harmonic distortion ≤ 3% THD (linear load), 6% max (battery mode before shutdown)
Switching time 0 ms
Battery type 2x 9Ah 12V
Typical recharge time 4-6 hours to recharge to 90% capacity
Security Overload, under-discharge and over-discharge protection
LCD AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery
Emergency operation Beep every 10 seconds
Low battery Beep every second
Overload Beep every 0.5 sec.
Need to replace the battery. Beep every 2 sec.
Injury Continuous beep
Dimensions, L x W x H (mm) 282 x 145 x 220
Net weight (kg) 9,8
Noise level less than 50dB at 1m distance
USB Port Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC

SUPPORT

Operating Instructions Download

FAQ

1. what is the Orvaldi VT1K used for?

This model is used for servers, critical workstations, and CRITICAL devices (used in medicine).

2. the Orvaldi VT1K is too small, I would like/want something larger in this series.

We have in our offer the older brothers of VT1K, namely: VT2K and Orvaldi VT3K. They have much more power if needed.

3. will the Orvaldi VT1K handle the harsh conditions?

Depends on what we mean by "harsh conditions". As for this model, it can take a wider allowable input voltage, not using the energy stored in the batteries, it puts out a CLEAN stabilized sine wave output.

Recommended products
257,38 EUR without VAT (net)
AVAILABILITY:
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Added to cart
-
+
PCS
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.