EN
The highest quality Carrier sector antennas are optimized for MIMO performance and cluster deployment. Colocation with a sector class is an easy task thanks to BackShield technology patented by RF Elements.
- Balanced antenna systems for MIMO performance The carrier-class sector antennas are optimized for balanced performance between H&V systems. The radiation pattern and gain make antennas stand out with excellent MIMO parameters.
- Light and compact The antenna body and brackets are compact and lightweight and are made of top quality aluminium, giving them an advantage over the competition.
- BackShield technology The frequency reflectors are integrated into the antenna design to attenuate the side lobes and rear radiation. The BackShield Technology significantly improves the colocation capacity when used in the cluster sector.
- Low cost efficiency Many powerful features at no extra cost. No extra charge for external RF shields.
Selective reflectors with a frequency attenuating side lobes and reverse radiation are built into the antenna structure, optimized for the specific frequency range in which the antenna operates.
Carrier class sector antennas made of aluminium and stainless steel are compact and lightweight, providing an advantage over the competitors' products. The RF ports are protected by a removable protective cover, which was first introduced to the market by RF Elements and is now widely used by other antenna manufacturers.
Features / filters | |
Antenna frequency | 5 GHz |
Antenna type | Sector |
Energy gain | 10dBi - 20dBi |
Application | Outdoor |
Compatible with brand | Mikrotik, Ubiquiti, Cambium, |
Connector type | 2x RP-SMA |
Cross polarization isolation | >21 dB |
Front-to-back ratio | 29 dB |
Horizontal beamwidth | 96° |
IP Rating | IP55 |
MIMO Type | 2x2 |
Polarization | Double linear |
Vertical beamwidth | 100° |
VSWR | 1.8:1 |
Physical data | |
Antenna connection | 2 RPSMA on integrated pigtails |
Antenna type | 5 GHz, 20 dBi |
Wind resistance | 160 km/h |
Electrical slope | 0° |
Pole mounting diameter | Max. 85 mm |
Weight | 3,1 kg/6,8 lbs - single unit 4.1 kg/9 Ibs - single unit with packaging |
Dimensions | Single retail box: 115 x 10 x 22 cm |
Performance | |
Frequency range | 5450 - 5850 MHz |
Strengthening | 19.7 dBi |
Polarisation | 2 x 2 HV |
Signal ratio front to back | 29 dB |
Cross-insulation | H 21 dB/V 21 dB |
Resistance | 50 Ω |
Maximum standing waveform factor | 1,8 |
Isolation between ports | 27 dB |
Compatibility | |
RF Elements | StationBox S, StationBox S CARRIER CLASS, RockShield |
Cambium Networks | ePMP 1000 (with EasyBracket for ePMP) |
MicroTik | BaseBox, NetBox, NetMetal (with EasyBracket 912) |