EN
The UltraDish TP 550 series are parabolic directional antennas with double 2x2 MIMO polarity. The reflector is made of aluminum alloy, which ensures uniform shape of the antenna. Lossless TwistPort connector guarantees easy implementation and maintenance of the radio. The antenna operates in the 5 GHz band and its gain is 27 dBi.
Installation of the antenna is extremely easy, which ensures quick implementation for large radio projects. Our innovative way of mounting the antenna, with left- and right-hand option, fits a wide range of pole diameters. For quick installation you only need one HEX tool.
The TwistPort connector is a fast closing and practically lossless waveguide port connecting radio and antenna. TwistPort is a project by RF Elements, which sets a new standard for external wireless devices in terms of performance, scalability and ease of use.
UltraDish TP series antennas guarantee innovative mounting system. The handle is separated from the antenna, so installation is not a problem, and adjusting the antenna is easy, fast and pleasant.
Features / filters | |
Antenna frequency | 5 GHz |
Antenna type | Directional |
Energy gain | 21dBi - 30dBi |
Application | Outdoor |
Connector type | TwistPort |
Front-to-back ratio | 37 dB |
Horizontal beamwidth | 8° |
IP Rating | IP65 |
Numbers of pieces in the package | 4-pack |
Vertical beamwidth | 8.5° |
Physical data | |
Combination of antennas | TwistPort - fast closing waveguide port |
Antenna type | Parabolic disk |
Pole mounting diameter | 25 - 80 mm |
Resistance to temperature | -40°C to 60°C (-40°F to 140°F) |
Wind resistance | 160 km/h |
Weight | 3.7 kg (8 Ibs) - single unit (one antenna) 19,3 kg (43 lbs) - 4 units per package |
Dimensions of the retail packaging | 610 x 610 x 460 mm (24.0 x 24.0 x 18.1 inches) |
Step 1: Bracket installation
First install the bracket on the pole. Two sets of screws for columns of different diameters are included.
The pole bracket is reversible and can be mounted on the left or right side of the antenna.
Step 2: Setting up the antenna
Simply slide the antenna into the holder and adjust the height and azimuth. To complete the installation, tighten the screws, .
Only one tool is needed to complete the installation.