Sharp NU-AC310 | Solar panel | 310W, Monocrystalline
CODE: NU-AC310
EN
The main advantages of Half Cut modules for users are the increase in efficiency and total yield by about 2-3%. The presented module consists of two parts, upper and lower, on which divided cells are placed. Thanks to this treatment the power of electricity produced by the cell is reduced by half and the resistance losses at the cell and module level are reduced by 75%. Reducing the current by 50% by lowering the temperature in the cells significantly reduces the risk of hot spots.
Basic general data | |
Manufacturer | Sharp |
Model | NU-AC310 |
Type | Photovoltaic panel |
Electrical data (STC) | |
Maximum power (Pmax) | 310 W |
Open circuit voltage (Voc) | 40,82 V |
Closed circuit current (Isc) | 9,89 A |
Voltage at maximum power point (Vmpp) | 33,18 V |
Current at maximum power point (Impp) | 9,35 A |
Module performance | 18,9 % |
Electrical data (NMOT) | |
Maximum power (Pmax) | 226,1 W |
Open circuit voltage (Voc) | 36,29 V |
Closed circuit current (Isc) | 7,75 A |
Voltage at maximum power point (Vmpp) | 30,64 V |
Current at maximum power point (Impp) | 7,38 A |
Mechanical data | |
Length | 1650 mm |
Width | 992 mm |
Depth | 35 mm |
Weight | 18,5 kg |
Temperature coefficients | |
Pmax | -0,375%/°C |
Voc | -0,273%/°C |
Isc | 0,037%/°C |
Limit values | |
Maximum system voltage | 1 000 VDC |
Overvoltage protection | 15 A |
Temperature range | -40 to 85°C |
Maximum mechanical load (snow/wind) | 2 400 Pa |
Tested snow load (IEC61215 test) | 5 400 Pa |
General information | |
Cells | Monocrystalline silicon, 157 mm × 157 mm, 60 cells in series |
Windscreen | Anti-reflective made of tempered glass with high transmission and low iron content, 3.2 mm |
Frame | Anodised aluminium alloy, silver |
Back panel | White |
Junction box | IP67, 3 bypass diodes |
Cable | Diameter 4.0 mm², length 1 000 mm |
Connector | MC4 (Multi Contact, Stäubli Electrical Connectors AG) |
Data sheet | Download |