The main advantages of the half cut modules for users are an increase in performance and total yield by about 2-3%. The module is divided into an upper and a lower part, on which there are divided cells. Thanks to such a procedure, the power of electricity generated by the cell is reduced by half and the resistance loss at the cell and module level is reduced by 75%. In addition, halving the current may significantly reduce the risk of a hot spot effect by lowering the temperature in the cells.
| Features / filters | |
| Power (W) | 330 |
| Electrical data (STC) [1] | |
| Maximum power Pmax | 330W |
| Open circuit voltage Voc | 41.32V |
| Closed circuit current Isc | 10.35A |
| Voltage at maximum power point Vmpp | 34.27V |
| Current intensity at maximum point. of power Impp | 9.63A |
| Module performance ηm | 19.5% |
| Electrical data (NMOT) [2] | |
| Maximum power Pmax | 245.57W |
| Open circuit voltage Voc | 39.16V |
| Closed circuit current Isc | 8.39A |
| Voltage at maximum power point Vmpp | 31.81V |
| Current intensity at maximum point. of power Impp | 7.72A |
| Mechanical data | |
| Length | 1684 mm |
| Width | 1002 mm |
| Depth | 40 mm |
| Mass | 19.5 kg |
| Temperature coefficients | |
| Pmax | -0.353%/°C |
| Uoc | -0.269%/°C |
| Isc | 0.037%/°C |
| Limits | |
| Maximum system voltage | 1000 VDC |
| Surge protection | 20 A |
| Temperature range | -40 to 85 °C |
| Maximum mechanical load (snow/wind) | 2400 Pa |
| General information | |
| Links | Half-cut cell mono, 159 mm × 79.5 mm, 2 thongs 60 cells connected in series |
| Windscreen | Anti-reflective tempered glass with high transmission and low content iron (low iron), 3,2 mm |
| Box | Anodized aluminium alloy, silver |
| Back panel | White |
| Junction box | Protection class IP68, 3 bypass LEDs |
| Cable | 4.0 mm², length 1 200 mm |
| The link | MC4 (Multi Contact, Stäubli), IP68 |
[1] STC = standard test conditions: exposure 1 000 W/m², AM 1.5, cell temperature 25 °C. Rated electrical characteristics are within ±10% of the indicated Isc, Voc and 0 to +5% Pmax (power tolerance ±3%).
[2] NMOT = Module operating temperature: 45 °C, at 800 W/m² exposure, 20 °C air temperature, wind speed 1 m/s.
