Teltonika 1-Wire RFID | RFID Reader and card | 40cm cable
CODE: TELTONIKA 1 WIRE PRIEDASKIR
EN
One of the implemented features for fleet management devices is 1-Wire data protocol, which can be used to read RFID tags by emulating them using iButton protocols. This is a convenient way to implement driver authentication in vehicles if you want to use RFID tags with minimal configuration complexity.
Technical data | |
Interface | White wire - data 1-wire, Brown wire - power supply, Green wire - ground |
Power supply range | 6.5-30 V DC |
Frequency | 125 kHz |
Transponder type | Manchester, 64 cycles per bit |
Antenna surface | 6.8 cm2 |
Reading range | 4 cm |
Reading frequency | 6 times per second for identification 2 times per second when the transponder is in range of the reader |
Supported 1-Wire commands | 0x33 (0x0F) - Read ROM 0xF0 - Search ROM |
Mounting method | Thread M12 |
Cable length | 40 cm |
Operating temperature | From -20 ºC to 55 ºC |
Legal regulations | RoHS certified |
Data sheet | Download |