Teltonika FMB003 GPS locator is a compact plug and play device that is designed to connect to OBD diagnostic connectors. Its distinguishing feature is the ability to read OEM (PID) data through the vehicle's on-board diagnostics connector. The device enables reading of current odometer parameters and fuel level information.
Teltonika FMB003 GPS locator can be sought after in various spheres where transportation is used, including organization of commercial vehicle traffic in fleets, tracking of drivers' working hours, transport insurance with telematics application, car rental services, carsharing, etc.
The Tracker supports connection to a variety of Bluetooth Low-power (BLE 4.0) devices, including various sensors, beacons and headsets. Bluetooth firmware update and configuration capabilities extend the functionality of the GPS tracker.
| Features / filters | |
| Communication type | OBDII, Bluetooth, |
| Battery capacity | 45 |
| Battery life (max) | 4 |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery type | Rechargeable |
| Battery voltage | 3.7 |
| Bluetooth | Yes |
| Built-in display | No |
| Built-in memory | Yes |
| Built-in memory capacity | 0.128 |
| Certification | CE/RED, UKCA, E-Mark, EAC, RoHS, REACH, SIRIM QAS, Anatel, SDPPI POSTEL |
| Depth | 29.1 |
| Electronic compass | Yes |
| GSM bands supported | 850,900,1800,1900 |
| Height | 26 |
| International Protection (IP) code | IP41 |
| LED indicators | Status |
| Memory card slot(s) | No |
| Operating relative humidity (H-H) | 5 - 95 |
| Operating temperature (T-T) | -40 - 85 |
| Plug and Play | Yes |
| Product colour | Black |
| Protection features | Dust resistant, Temperature proof |
| Purpose | Car |
| SIM card capability | Single SIM |
| SIM card slot | Yes |
| Storage relative humidity (H-H) | 5 - 95 |
| Storage temperature (T-T) | -40 - 85 |
| USB connector type | Micro-USB |
| USB port | Yes |
| USB version | 2.0 |
| Weight | 30 |
| Width | 52.6 |
| Module | |
| Model | Teltonika TM2500 |
| Technology | GSM/GPRS/GNSS/BLUETOOTH |
| GNSS | |
| GNSS | GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS |
| Receiver | 33 channel |
| Tracking sensitivity | -165 dBM |
| Position accuracy | < 2,5 m |
| Hot start | < 1 s |
| Warm start | < 25 s |
| Cold start | < 35 s |
| Mobile network | |
| Technology | GSM |
| 2 G bands | Quad-band 850/900/1800/1900 MHz |
| Data transfer | GPRS Multi-Slot Class 12(up to 240 kbps) |
| Data handling | SMS (text/data) |
| Power supply | |
| Input voltage range | 10-30 V DC with overvoltage protection |
| Spare battery | 3.7 V 45 mAh |
| Energy consumption | At 12 V < 5 mA (Ultra deep sleep) At 12 V < 7 mA (Deep Sleep) At 12 V < 7 mA (online sleep) At 12 V < 8 mA (GPS sleep) At 12 V < 28 mA (nominal) |
| Bluetooth | |
| Specification | 4.0 LE |
| Supported peripherals | Temperature and humidity sensor, headset, Inateck barcode scanner, support for universal BLE sensors |
| Physical specification | |
| Dimensions | 52.6 mm x 29.1 mm x 26 mm (L x W x H) |
| Interfaces | |
| Sensors | Accelerometer |
| Scenarios | Eco driving, speeding detection, jamming detection, GNSS fuel meter, excessive idling detection, disconnection detection, towing detection, collision detection, automatic geofence, manual geofence, travel |
| Sleep modes | GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep |
| Configuration and firmware upgrade | FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application |
| SMS | Configuration, events, debugging |
| GPRS commands | Configuration, debugging |
| Time synchronization | GPS, NITZ, NTP |
| Fuel monitoring | OBD II |
| Ignition detection | Accelerometer, external supply voltage, engine speed |
| Work environment | |
| Operating temperature (without battery) | -40 °C to 85 °C |
| Storage temperature (without battery) | -40 °C to 85 °C |
| Operating humidity | 5% to 95% non-condensing |
| Degree of protection | IP41 |
| Battery charging temperature | 0 °C to 45 °C |
| Battery discharge temperature | -20 °C to 60 °C |
| Battery storage temperature | -20 °C to 45 °C for 1 month -20 °C to 35 °C for 6 months |
1. open the top cover of the unit. The cover is opened by unzipping it in the corner recess.
Insert the Nano-SIM card as shown with PIN request turned off. Make sure the Nano-SIM card is properly installed in the holder. 3.
3) Connect the battery as shown in the picture.
After configuring see " PC connection (Windows)", connect the device cover back.
