Teltonika RUTX50 | Industrial router | 5G, Wi-Fi 5, Dual SIM, 5x RJ45 1000Mb/s
CODE: TELTONIKA RUTX50 000000 / EAN: 4779051840250
Contact
Account
Favorite
Cart
Teltonika 's RUTX50 is a future-proof, multi-network industrial router offering 5G mobile communications for high-speed, data-intensive applications. The RUTX50 is equipped with 5 Gigabit Ethernet ports, WiFi, Dual-SIM, GPS, a powerful processor and RutOS software for advanced networking solutions.
5G dual SIM cellular communications combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enable reliable data transfer with ultra-low latency. The power of 5G technology combined with a wide range of interfaces and industrial hardware features ensures adaptability for future upgrades and expansions
The RUTX50 comes with RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is compatible with Remote Management System (RMS), providing optimized remote management and monitoring capabilities for large fleets of equipment .
| Mobile network | |
| Mobile module | 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) - LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G - 42 Mbps DL, 5.76Mbps UL |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, combined bandwidth, IMSI, ICCID |
| SMS/Call | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto responder, call tools |
| USSD | Supports sending and reading unstructured ancillary service data messages |
| Black/White list | Black/white list of operators |
| Bandwidth management | Band lock, display status of used bandwidth |
| APN | Auto APN |
| Bridge mode | Direct connection (bridge) between the mobile ISP and the device on the LAN |
| Passthrough | The gateway assigns its mobile WAN IP address to another device on the LAN |
| Multiple DAPs | Ability to use different PDNs for multiple network accesses and services |
| Wireless networks | |
| Wireless mode | 802.11b/g/n/ac Wave 2 (WiFi 5) with data rates up to 867 Mbps (Dual Band, MU-MIMO), high-speed 802.11r transition, access point (AP), station (STA) |
| Wi-Fi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation. |
| ESSID | ESSID stealth mode |
| Wi-Fi users | Up to 150 simultaneous calls |
| Wireless access point | Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page |
| Wireless mesh/roaming | Wireless mesh (802.11s), fast roaming (802.11r) |
| Ethernet | |
| WAN | 1x WAN (can be configured for LAN) 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports Auto MDI/MDIX |
| LAN | 4 x RJ45 port, 10/100/1000 Mbps, supports auto crossover MDI/MDIX |
| Network | |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL). |
| Routing | Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forwarding, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation |
| DDNS | >25 service providers supported, others can be configured manually |
| Security | |
| SSHFS | Ability to mount a remote file system via SSH protocol |
| Authentication | Shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via Web.UI, Unlimited firewall configuration via CLI, NAT, NAT-T |
| Preventing attacks | DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention), Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks). |
| VLAN | Port-based and tag-based VLAN separation |
| Mobile limit control | Setting custom data limits for the SIM card |
| WEB Filter | Black list to block unwanted websites, white list to determine allowed sites |
| Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filters |
| VPN | |
| OpenVPN | Ability to run multiple clients and servers simultaneously, 12 encryption methods |
| OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| GRE | GRE tunnel |
| IPsec | IKEv1, IKEv2, supports up to 5 x IPsec VPN tunnels (instances) with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| SSTP | SSTP client instance support |
| STUNNEL | Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code |
| DMVPN | A method for building scalable IPsec VPN networks |
| PPTP, L2TP | Client/server services can run simultaneously, L2TPv3 support |
| WireGuard | WireGuard VPN client and server support |
| ZeroTier | ZeroTier VPN |
| Modbus TCP Slave | |
| ID filtering | Reply to one identifier in the range [1;255] or any |
| Allow remote access | Allow access over WAN |
| Custom registers | A custom MODBUS TCP register block that allows reading/writing to a file inside the router and can be used to extend the functionality of the MODBUS TCP slave |
| Modbus TCP Master | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| MQTT Gateway | |
| Gateway | Enables sending commands and receiving data from MODBUS Master via MQTT broker |
| DNP3 | |
| Supported modes | TCP Master, DNP3 Outstation |
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
| Data to Server | |
| IoT platforms | |
| The cloud of things | Allows monitoring of: Device data, Mobile data, Network information, Availability |
| ThingWorx | Allows you to monitor: WAN type, WAN IP Mobile carrier name, Mobile signal strength, Mobile network type |
| Cumulocity | Allows you to monitor: Device model, revision and serial number, Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP. |
| Azure IoT Hub | It can send device IP, number of bytes sent/received/ 3G connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type, temperature, Azure IoT Hub server PIN number. |
| Monitoring and management | |
| Web.UI | HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting, event log, system log, kernel log |
| FOTA | Remote firmware update from server, automatic notifications |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
| Call | Restart, status, mobile data on/off, output on/off |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| JSON-RPC | API management over HTTP/HTTPS |
| MODBUS | MODBUS TCP status/control |
| RMS | Teltonika Remote Management System (RMS) - Teltonika Remote Management System |
| System parameters | |
| CPU | Quad-core ARM Cortex A7, 717 MHz |
| Flash memory | 256 MB (80 MB available for user space) |
| RAM | 256 MB (100 MB available for user space) |
| Software/Configuration | |
| Web.UI | Update software from file, check software on server, configuration profiles, configuration backup |
| FOTA | Software update |
| RMS | Software/configuration update for multiple devices |
| Save settings | Software update without losing current configuration |
| Software customization | |
| Operating system | RutOS (OpenWrt based Linux OS). |
| Supported languages | Busybox shell, Lua, C |
| Development tools | SDK package with build environment provided |
| Location tracking | |
| GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
| NMEA | NMEA 0183 |
| Server software | Supported Server Software TAVL, RMS |
| Geofencing | Configurable multiple geofence zones |
| USB | |
| USB standard | USB 2.0 |
| Applications | Samba sharing, USB-to-serial, Modbus gateway |
| External devices | Ability to connect external hard drive, flash memory, additional modem, printer |
| Recording formats | FAT, FAT32, NTFS |
| Inputs/Outputs | |
| Inputs | 1 x digital input, 0-6 V detected as logic low state, 8-30 V detected as logic high state |
| Outputs | 1 x digital output, open collector output, max output 30 V, 300 mA |
| Event handling | SMS, Email, RMS |
| I/O juggler | Allows you to set certain I/O conditions to initiate an event |
| Connector | 4-pin industrial DC power connector |
| Input voltage range | 9 - 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
| PoE (passive) | Mode B, LAN1 Port, 9 - 50 VDC |
| Power consumption | Idle: <4 W, Max: <18 W |
| Physical interfaces (ports, LED, antennas, buttons, SIM) | |
| Ethernet | 5x RJ-45, 10/100/1000 Mbps |
| I/O | 1 x digital input, 1 x digital output on 4-pin power connector |
| LEDs | 3 connection status LEDs, 3 connection strength LEDs, 10 Ethernet port status LEDs, 4 WAN status LEDs, 1 power LED, 2 LEDs for 2.4G and 5G WiFi |
| SIM | 2 x SIM socket (Mini SIM - 2FF), 1.8 V/3 V |
| Power supply | 1 x 4-pin DC power connector |
| Antennas | 4 x SMA for mobile devices 2 x RP-SMA for WiFi 1 x SMA for GNSS |
| USB | 1 x USB A port for external devices |
| Reset | Restart button/restore user default settings/restore factory settings |
| Other | 1 x grounding screw |
| Physical characteristics | |
| Housing material | Aluminum housing |
| Dimensions | 132 x 44.2 x 95.1 mm |
| Weight | 533 g |
| Mounting options | DIN rail (can be mounted on two sides), placement on flat surface |
| Work environment | |
| Ambient temperature range during operation | -40 °C to 75 °C |
| Ambient humidity during operation | 10% to 90%, non-condensing |
| Protection class | IP30 |
