Teltonika TRB143 | IoT Gateway | LTE Cat 4, 3G, 2G, M-Bus, RMS
CODE: TELTONIKA TRB143 / EAN: 4779051840137
Contact
Account
Favorite
Cart
The gateway is specifically designed for telemetry and utility monitoring applications, with M-Bus support. LTE Cat 4 cellular and wired connectivity enhances the smart metering process by providing data transmission of key meter readings. In addition, the TRB143 can connect up to 250 slaves and use the M-Bus interface to power up to 6 devices.
This device has one Gigabit Ethernet port and a pair of digital I/Os, making it easy to apply to a myriad of environmental performance monitoring scenarios.
Remote monitoring and configuration are easy and secure with software security features such as a pre-configured firewall and Open VPN, as well as FOTA compatibility, SMS control and Teltonika Networks' own remote management system.
| Features / filters | |
| Antenna connector type | SMA |
| Antenna type | External |
| Antennas quantity | 1 |
| Built-in processor | Yes |
| Certification | CE/RED, EAC, RoHS, WEEE Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0 EN 61000-4-2:2009 EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2 EN 61 |
| DC input voltage | 9 – 30 |
| Depth | 18 |
| Dynamic DNS (DDNS) | Yes |
| Firewall security | Yes |
| Flash memory | 512 |
| Height | 60 |
| Internal memory | 128 |
| International Protection (IP) code | IP30 |
| LED indicators | Yes |
| MAC address filtering | Yes |
| Management protocols | HTTP/HTTPS, JSON-RPC, RMS |
| Manual | Yes |
| NAT functionality | NAT, NAT-T |
| Number of processors installed | 1 |
| Number of simultaneous SIM cards | 1 |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | -40 - 75 |
| Processor frequency | 1200 |
| Product colour | Grey |
| Quick start guide | Yes |
| Reset button | Yes |
| Safety | IEC 62368-1:2014, EN 50385:2017, EN 62232:2017 |
| Security algorithms | 256-bit AES, DES, HTTPS, SSH, SSL/TLS |
| Short Message Service (SMS) | Yes |
| SIM card slot | Yes |
| SIM card type | MiniSIM |
| Supported network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, SNMP, MQTT |
| USB 2.0 ports quantity | 1 |
| VPN support | OpenVPN, IPsec, GRE, PPTP, L2TP |
| Web-based management | Yes |
| Weight | 136 |
| Wi-Fi | No |
| Width | 70 |
| Wireless connection | Yes |
| Wireless network | |
| OpenVPN | multiple clients and server can run simultaneously, 12 encryption methods |
| Mobile module | 4G (LTE) - Cat 4 up to 150 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps |
| OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128 -CBC, AES-192-CBC, AES-256-CBC |
| GRE | GRE tunnel |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, combined bandwidth, IMSI, ICCID |
| SMS/Call | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-response, call tools |
| IPsec | IKEv1, IKEv2, supports up to 5 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| PPTP, L2TP | Client/server services can run simultaneously, L2TPv3 support |
| USSD | supports sending and reading unstructured messages of additional service data |
| Black/white list | Black/white list of operators |
| SSTP | SSTP client instance support |
| Bandwidth management | Band lock, display of status of used bandwidth |
| Stunnel | A proxy server designed to add TLS encryption functionality to existing clients and servers without any changes to the program code |
| DMVPN | Method of building scalable IPsec VPN networks |
| APN | Automatic APN |
| WireGuard | WireGuard VPN client and server support |
| Bridge | Direct connection (bridge) between the mobile ISP and the device on the LAN |
| ZeroTier | ZeroTier VPN |
| Transmission of | Gateway assigns its mobile WAN IP address to another device on the LAN |
| M-BUS | |
| Multiple DAPs | Ability to use different PDNs for multiple network accesses and services (optional) |
| Ethernet | |
| M-Bus interface | The M-Bus interface can support up to 250 slaves and can power up to 6 slaves. |
| LAN | 1 x RJ45 port, 10/100/1000 Mbps, supports automatic MDI/MDIX switching |
| MODBUS TCP SLAVE | |
| Network | |
| Filtering identifiers | answer to one identifier in the range [1;255] or any one |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) |
| Allow remote access | Allow access over the WAN |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
| Custom registers | A custom MODBUS TCP register block that allows reading/writing to a file inside the router and can be used to extend the functionality of the MODBUS TCP Slave |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link control. |
| MODBUS TCP MASTER | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Firewall | Port forwarding, traffic rules, custom rules |
| DHCP | Static and dynamic IP address assignment |
| Supported data formats | 8 bits: INT, UINT; 16 bits: INT, UINT (MSB or LSB first); 32-bit: floating-point, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| QoS / Smart Queue Management (SQM). | Prioritization of traffic by source/destination, service, protocol or port |
| MQTT GATEWAY | |
| DDNS | >25 service providers supported, others can be configured manually |
| Gateway | Enables sending commands and receiving data from MODBUS Master via MQTT broker |
| SSHFS | Ability to mount a remote file system via SSH protocol |
| DATA TO SERVER | |
| Security | |
| Minutes | HTTP(S), MQTT, Azure MQTT, Kinesis |
| Monitoring and management | |
| Authentication | shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, Unlimited firewall configuration via CLI; NAT; NAT-T |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, system log, kernel log |
| Preventing attacks | DDOS attack prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas attacks, NULL flags, FIN scan attacks) |
| FOTA | Firmware update from server, automatic notification SSH: SSH (v1, v2) |
| Mobile allocation control | Set up custom data limits for your SIM card |
| SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
| WEB filter | Black list to block unwanted websites, White list to specify only allowed sites |
| Call | restart, status, enable/disable mobile data, output on/off, receive/disconnect with timer |
| Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filter |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, friendly technology, AVSystem |
| MQTT | MQTT broker, MQTT publisher |
| VPN | |
| OpenVPN | multiple clients and server can run simultaneously, 12 encryption methods |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128 -CBC, AES-192-CBC, AES-256-CBC |
| JSON-RPC | management API over HTTP/HTTPS |
| GRE | GRE tunnel |
| Modbus | Modbus TCP status/control |
| RMS | Teltonika Remote Management System (RMS) |
| IPsec | IKEv1, IKEv2, supports up to 5 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| IoT platforms | |
| PPTP, L2TP | Client/server services can run simultaneously, L2TPv3 support |
| SSTP | SSTP client instance support |
| Cloud of Things | Enables monitoring of: device data, mobile data, network information, availability |
| Stunnel | A proxy server designed to add TLS encryption functionality to existing clients and servers without any changes to the program code |
| ThingWorx | Allows you to monitor: WAN type, WAN IP mobile network operator name, mobile network signal strength, mobile network type |
| DMVPN | Method of building scalable IPsec VPN networks |
| Cumulocity | Enables monitoring of: device model, version and serial no, mobile cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP address |
| WireGuard | WireGuard VPN client and server support |
| Azure IoT Hub | can send device IP address, number of bytes sent/received/ 3G connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, version, IMSI, SIM card status, PIN status, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator Number, Connection type, Temperature, PIN number for Azure IoT Hub server. |
| System characteristics | |
| ZeroTier | ZeroTier VPN |
| M-BUS | |
| CPU | ARM Cortex-A7 1.3 GHz CPU |
| M-Bus interface | The M-Bus interface can support up to 250 slaves and can power up to 6 slaves. |
| RAM | 256 MB (160 MB available for user space) |
| MODBUS TCP SLAVE | |
| FLASH | 512 MB (200 MB available for user space) |
| Firmware / configuration | |
| Filtering identifiers | answer to one identifier in the range [1;255] or any one |
| Allow remote access | Allow access over the WAN |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
| Custom registers | A custom MODBUS TCP register block that allows reading/writing to a file inside the router and can be used to extend the functionality of the MODBUS TCP Slave |
| FOTA | Update FW |
| MODBUS TCP MASTER | |
| RMS | FW/configuration update for multiple devices |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Keep your settings | Update FW without losing current configuration |
| Supported data formats | 8 bits: INT, UINT; 16 bits: INT, UINT (MSB or LSB first); 32-bit: floating-point, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| Customizing firmware | |
| Operating system | RutOS (Linux operating system based on OpenWrt) |
| MQTT GATEWAY | |
| Gateway | Enables sending commands and receiving data from MODBUS Master via MQTT broker |
| Supported languages | Busybox shell, Lua, C, C |
| DATA TO SERVER | |
| Development tools | SDK package with provided compilation environment |
| Minutes | HTTP(S), MQTT, Azure MQTT, Kinesis |
| Input/Output | |
| Monitoring and management | |
| Configurable inputs/outputs | 1 x digital input, 0-6 V detected as logic low level, 8-30 V detected as logic high level |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, system log, kernel log |
| Output control | HTTP POST/GET, Schedule |
| FOTA | Firmware update from server, automatic notification SSH: SSH (v1, v2) |
| Events | SMS, EMAIL |
| SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
| I/O juggler | Allows you to set certain input/output conditions to initiate an event |
| Power supply | |
| Call | restart, status, enable/disable mobile data, output on/off, receive/disconnect with timer |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, friendly technology, AVSystem |
| Connector | 4-pin industrial DC power socket |
| MQTT | MQTT broker, MQTT publisher |
| Input voltage range | 12 - 30 VDC (industrial 4-pin socket), reverse polarity protection, surge protection >33 VDC 10us max |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| Power consumption | Idle: 3 W, Max: 6 W |
| JSON-RPC | management API over HTTP/HTTPS |
| Interfaces (ports, LEDs, antennas, buttons, sim) | |
| Modbus | Modbus TCP status/control |
| Ethernet | 1 RJ45 port, 10/100/1000 Mbps |
| RMS | Teltonika Remote Management System (RMS) |
| M-Bus | 1 x M-Bus interface |
| IoT platforms | |
| I/O | 2 configurable I/O pins on 4-pin power connector |
| Cloud of Things | Enables monitoring of: device data, mobile data, network information, availability |
| Status LEDs | 3 x connection type status LEDs, 3 x connection strength LEDs, 2 x LAN status LEDs, 1 x power LED |
| ThingWorx | Allows you to monitor: WAN type, WAN IP mobile network operator name, mobile network signal strength, mobile network type |
| SIM | 1 x SIM socket (Mini SIM - 2FF), 1.8 V/3 V |
| Power supply | 1 x 4-pin DC power connector |
| Cumulocity | Enables monitoring of: device model, version and serial no, mobile cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP address |
| Azure IoT Hub | can send device IP address, number of bytes sent/received/ 3G connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, version, IMSI, SIM card status, PIN status, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator Number, Connection type, Temperature, PIN number for Azure IoT Hub server. |
| Antenna | 1 x female SMA for LTE |
| Reset | Restart button/restore user default settings/restore factory settings |
| System characteristics | |
| Physical parameters | |
| CPU | ARM Cortex-A7 1.3 GHz CPU |
| Housing material | Aluminum housing |
| RAM | 256 MB (160 MB available for user space) |
| FLASH | 512 MB (200 MB available for user space) |
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm |
| Firmware / configuration | |
| Weight | 145 g |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
| Mounting options | DIN rail, wall mounting (additional kits required), placement on flat surface |
| Work environment | |
| FOTA | Update FW |
| RMS | FW/configuration update for multiple devices |
| Operating temperature | -40°C to 75°C |
| Operating humidity | 10% to 90% non-condensing |
| Keep your settings | Update FW without losing current configuration |
| Degree of protection | IP30 |
| Customizing firmware | |
| Operating system | RutOS (Linux operating system based on OpenWrt) |
| Certificates and approvals | |
| Supported languages | Busybox shell, Lua, C, C |
| Regulations | CB, CE, UKCA, RoHS, REACH, WEEE |
| Security | |
| Development tools | SDK package with provided compilation environment |
| Input/Output | |
| Standards | IEC 62368-1:2018 |
| Configurable inputs/outputs | 1 x digital input, 0-6 V detected as logic low level, 8-30 V detected as logic high level |
| Output control | HTTP POST/GET, Schedule |
| Events | SMS, EMAIL |
| I/O juggler | Allows you to set certain input/output conditions to initiate an event |
| Power supply | |
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 12 - 30 VDC (industrial 4-pin socket), reverse polarity protection, surge protection >33 VDC 10us max |
| Power consumption | Idle: 3 W, Max: 6 W |
| Interfaces (ports, LEDs, antennas, buttons, sim) | |
| Ethernet | 1 RJ45 port, 10/100/1000 Mbps |
| M-Bus | 1 x M-Bus interface |
| I/O | 2 configurable I/O pins on 4-pin power connector |
| Status LEDs | 3 x connection type status LEDs, 3 x connection strength LEDs, 2 x LAN status LEDs, 1 x power LED |
| SIM | 1 x SIM socket (Mini SIM - 2FF), 1.8 V/3 V |
| Power supply | 1 x 4-pin DC power connector |
| Antenna | 1 x female SMA for LTE |
| Reset | Restart button/restore user default settings/restore factory settings |
| Physical parameters | |
| Housing material | Aluminum housing |
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm |
| Weight | 145 g |
| Mounting options | DIN rail, wall mounting (additional kits required), placement on flat surface |
| Work environment | |
| Operating temperature | -40°C to 75°C |
| Operating humidity | 10% to 90% non-condensing |
| Degree of protection | IP30 |
| Certificates and approvals | |
| Regulations | CB, CE, UKCA, RoHS, REACH, WEEE |
| Security | |
| Standards | IEC 62368-1:2018 |
