EN
The Teltonika TRB255 Network Gateway is a gateway for industrial cellular applications that supports LPWAN connectivity options. The model features flexibility of use with an RJ45 Fast Ethernet interface, serial interfaces (RS232, RS485) and multiple input/outputs. The device supports low-traffic cellular communications for NB-IoT telemetry devices, LTE Cat M1 technology, and is backward compatible with EGPRS (2G) wireless data technology.
The Teltonika TRB255 network gateway offers a cost-effective and scalable way to upgrade large amounts of legacy infrastructure or implement new M2M interoperability projects using support for various cellular standards. In addition, built-in GNSS, dual SIM cards and compatibility with Teltonika's remote control system enable not only reliable infrastructure connectivity, but also easy monitoring and management.
The device is designed to operate in extreme conditions (on the street, in vehicles), for which its housing is made of aluminum resistant to corrosion and physical loads. Reliability of the gate is also ensured by handling the supply voltage in a wide range(from 9 to 30 V).
Mobile connection | |
Mobile module | LTE (Cat M1) / NB-IoT / EGPRS |
SIM cards | 2 SIM cards Automatic switching scenarios: weak signal, data limit, SMS limit, roaming, no network, no data connection |
Status | Signal strength, connected range, SINR, RSRP, RSRQ, bytes sent/received |
Bridge mode | Direct connection (bridge) between mobile ISP and device in LAN |
SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, e-mail to SMS, SMS to e-mail, SMS to HTTP, SMS in reply to SMS, scheduled SMS, Auto reply to SMS |
Black/white list | Black/white list of operators |
Multiple DAPs | Ability to use different PDNs to access multiple networks and services |
Frequency management | Display of the status of the used range, range locking |
APN | Auto APN |
Ethernet | |
LAN | 1 10/100 Mbps LAN port IEEE 802.3, IEEE 802.3 u compliant, supports auto-MDI / MDIX |
Network | |
Routing | Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2) |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL) |
VoIP passthrough support | NAT assistants of H. 323 and SIP-alg ensuring correct routing of VoIP packets |
Call monitoring | Ping Reboot, Periodic Reboot, LCP and ICMP for connection control |
Firewall | Port forwarding, network traffic rules, customs rules |
QoS/Smart Queue Management (SQM) | Priority traffic queuing by source/recipient, Service, protocol or port, WMM, 802.11e |
DDNS | Supported> 25 service providers, others can be configured manually |
SSHFS | Ability to mount a remote file system using SSH protocol |
Security | |
Authentication | Shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T |
Prevention of attacks | DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN | Tag-based VLAN partitioning |
Control of mobile quotas | Custom data limits for both SIM cards |
WEB Filter | Black list to block unwanted websites, white list to determine allowed sites |
Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filters |
VPN | |
OpenVPN | Ability to run multiple clients and servers simultaneously, 12 encryption methods |
OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec | IKEv1, IKEv2, supports up to 4 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
PPTP, L2TP | Client/server services can run simultaneously |
DMVPN | A method for building scalable IPsec VPN networks |
GRE | GRE Tunnel |
Serial communication modes | |
Mode | Console, OverIP, Modem, Modbus RTU master, Modbus gateway, NTRIP client |
MODBUS | |
Modbus TCP slave | |
ID filtering | Response to a single identifier in the range [1; 255] or any of them |
Allow remote access | Allow access over WAN |
Non-standard registers | Configurable Modbus TCP logging unit that allows reading/writing a file inside the router and can be used to extend the functionality of the Modbus TCP Slave |
Modbus TCP master | |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bits: INT, UINT; 16 bits: INT, uint (older or younger bit first); 32-bit: floating-point, INT, UINT (ABCD (byte forward), DCBA (byte forward), CDAB, BADC) |
Modbus RTU master | |
Supported transmission speeds | From 300 to 3000000 |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bits: INT, UINT; 16 bits: INT, uint (older or younger bit first); 32-bit: floating-point, INT, UINT (ABCD (byte forward), DCBA (byte forward), CDAB, BADC) |
Number of data bits | 7 or 8 |
Number of stop bits | 1 or 2 |
Parity bits | No, even, odd |
Flow control | No, RTS / CTS (only for RS232 interface), Xon / Xoff |
MQTT gateway | |
Mucus | Allows sending commands and receiving data from Modbus Master via MQTT broker |
MODBUS data to server | |
Protocol | HTTP (S), MQTT, Azure MQTT |
Monitoring and management | |
WEB UI | HTTP / HTTPS, status, Configuration, FW update, command line interface, troubleshooting, event log, system log, kernel log |
FOTA | Firmware update from server, automatic notification |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, sending / reading SMS via HTTP POST / GET |
Phone | Restart, Status, Enable/disable mobile data, enable/disable output, receive/end with timer |
ТР-069 | OpenACS, EasyCwmp, ACSLite, Tgem, LibreACS, GenieACS, FreeACS, LibCWMP, friendly technologies, AVSystem |
MQTT | MQTT Broker, publisher of MQTT |
SNMP | SNMP (v1, v2, v3), SNMP Trap |
JSON-RPC | API management over HTTP / HTTPS |
Modbus | Status / Control Modbus TCP |
RMS | Teltonika Remote Control Systems (RMS) |
IoT platforms | |
Cloud of Things | Enables tracking of: device data, mobile data, network information, availability |
ThingWorx | Allows tracking of: WAN type, WAN IP carrier name, cellular signal strength, cellular network type |
Cumulocity | Allows you to track: device model, version and serial number, mobile cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP address. |
Azure IoT Hub | Can send device IP address, number of bytes sent / received / 3G connection status, network channel status, IMEI, ICCID, model, manufacturer, serial number, version, IMSI, SIM card status, PIN status, GSM signal, WCDMA RSCP, WCDMA EC / IO, LTE RSRP, LTE SINR, LTE RSRQ, cell ID, operator, operator number, connection type, temperature, Pin count for Azure IoT Hub server |
System characteristics | |
CPU | Qualcomm QCA9531, MIPS 24KC, 650 MHz |
RAM | 64 MB, DDR2 |
Flash memory | 16 MB SPI Flash (4 MB user accessible) |
Firmware / configuration | |
WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
FOTA | Update firmware/configuration from server |
RMS | Firmware / configuration update for multiple devices |
Save your settings | Update FW without losing the current configuration |
Software configuration | |
Operating system | RutOS (Linux Operating System based on OpenWrt) |
Supported languages | Busybox shell, Lua, C |
Development tools | SDK package with provided compilation environment |
Location tracking | |
GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
Directions | GNSS coordinates via WebUI, SMS, TAVL, RMS |
NMEA | NMEA 0183 |
NTRIP | NTRIP protocol (network transmission of RTCM over the Internet Protocol) |
Server Software | Supported server software TAVL, RMS |
Mobile network geolocation | GPS-less location, get approximate location from mobile tower on RMS |
Geofence | Configurable geofencing |
Inputs / Outputs | |
Configurable inputs/outputs | 3 configurable inputs / outputs. Digital input 0-6 V is recognized as logic low, 8-30 V is recognized as logic high. Open collector output, max. 30 V, 300 mA |
Analogue input | 1 Analog input (0-30 V) |
Event | SMS, Email |
Output control | HTTP POST / GET, schedule |
I/O juggler | Allows you to set specific input/output conditions to initiate an event |
Industrial Interfaces | |
RS232 | Terminal strip connector: TX, RX, RTS, CTS |
RS485 | Terminal strip connector: D , D-, R , R- (2 - or 4-wire interface) |
Supported transmission speeds | From 300 to 3000000 |
Number of data bits | 7 or 8 |
Number of stop bits | 1 or 2 |
Parity | No, even, odd |
Flow control | No, RTS / CTS (only for RS232 interface), Xon / Xoff |
Power supply | |
Eat | 2 pins in 16-pin industrial terminal box |
Input voltage | 9 - 30 V DC, reverse polarity protection, surge protection / - 1 kV, max. 50 µs |
Power consumption | Standby Time: <1.2 W, max .: <5 W |
Physical interfaces (ports, LEDs, antennas, button, SIM) | |
Ethernet | 1 RJ45 port, 10/100 Mbps |
Inputs / Outputs | 3 configurable inputs/outputs, 1 analog input in 16-pin terminal box |
Status LEDs | 3 connection status LEDs, 3 connection power LEDs, 1 power LED, 1 Ethernet port status LED |
SIM | 2 SIM card slots (Mini SIM-2FF), 1.8 V / 3 V, Dual SIM tray |
Power supply | 2 pins in 16-pin terminal box |
Antenna | 1 SMA connector for LTE, 1 SMA connector for GNSS |