EN
Teltonika TSW101 Industrial Switch - the perfect companion for all your automotive connectivity needs. Its power voltage range is designed to match your vehicle's power output, allowing your vehicle to power it directly and without additional adapters. On the other hand, the PoE capabilities of this switch allow this device to power other devices, eliminating the need for additional adapters.
This unmanaged switch has 5 Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE , with which it powers other devices in your solution. It is powered by a 2-pin DC socket and a VDC range of 9-30, reaching the best points of 12 V and 24 V, which are the standard for vehicle power outputs.
The TSW101 is a compact (115 x 32 x 95 mm) plug-n-play device with DIN rail and surface mounting, making it user-friendly and easy to install. Like other Teltonika connectivity devices, this switch is designed to operate in harsh environments. Vibration resistance, temperature resistance from -40°C to 75°C and a rugged aluminum housing enhance the reliability of this device.
Features / filters | |
Power consumption (max) | 2.31 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 4 |
Power over Ethernet (PoE) power per port | 30 |
Power over Ethernet (PoE) type supported | Passive PoE |
ETHERNET | |
LAN | 5 x LAN port, 10/100/1000 Mbps, IEEE 802.3, IEEE 802.3u, 802.3az compliance, auto MDI/MDIX support |
POE | |
PoE ports | Ports 1- 4 |
PoE standard | 802.3af and 802.3at |
PoE Max power per port | 30 W |
Total PoE power budget | 60 W |
Maximum Ethernet cable length | 100m |
EFFICIENCY | |
Throughput (Non-blocking) | 10 Gbps |
Buffer | 128 KB |
Jumbo Frames | 9216 bytes |
MAC address table size | 2K entries |
SUPPLY | |
Connector | 2-pin industrial DC power socket |
Input voltage range | 9-30 V DC |
Input voltage range for PoE | 9-30 VDC |
Power consumption | Idle: 0.64 W / Max: 2.31 W / PoE Max: 60 W |
PHYSICAL INTERFACES (PORTS, LEDS) | |
Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps |
LED statuses | 1 x power LED, 10 x LAN status LEDs |
Power supply | 1 x 2-pin DC connector |
Grounding | 1 x Grounding screw |
PHYSICAL SPECIFICATION | |
Housing material | All-aluminum housing |
Dimensions (W x H x D) | 115 x 32 x 95 mm |
Weight | 354g |
Assembly | DIN-rail or wall mounting (additional kit required), flat on surface |
WORK ENVIRONMENT | |
Operating temperature | -40 °C to 75 °C |
Operating humidity | 10% to 90% without condensation |
Degree of protection | IP30 |
Certificates and approvals | |
Regulations | CE, REACH, RoHS, WEEE TSW101 CE TSW101 UKCA TSW101 FCC TSW101 IC TSW101 CB TSW101 RCM E-Mark |
Security | |
Standards | EN IEC 62368-1:2020 A11:2020 |